Samsung SNB-5003 Скачать руководство пользователя страница 37

Страница: 37 / 160

English

_37

●

aLL

ation & connection

Connect the AUDIO IN port of the camera with the microphone or LINE OUT port of

the amplifier that the microphone is connected to.

As a microphone is built in, you can use the built-in microphone instead of an external one.

Connect the AUDIO OUT port of the camera with the speaker or LINE IN port of the

amplifier that the speaker is connected to.

Check the specifications for audio input.

•

audio codec

- Audio In : G.711 PCM (Bit Rate: 64kbps / Sampling Frequency: 8kHz), G.726

ADPCM (Bit Rate: 16Kbps, 24Kbps, 32Kbps, 40Kbps / Sampling Frequency: 8kHz)

- Audio Out : G.711 PCM (Bit Rate: 64kbps / Sampling Frequency: 8kHz)

•

full duplex audio

•

audio in

: Mono signal line input (Max.2.4 Vpp)

•

audio out

: Mono signal line output (Max.2.4 Vpp)

•

Line out impedance

: 600Ω

connecting to the i/o port box (SnB-5003/SnB-5004)

Connect the Alarm I/O signal to the corresponding port of the rear port box.

•

ALARM IN : Used to connect the alarm input sensor or external day/night sensor.

•

ALARM OUT : Used to connect the alarm output signal.

•

GND : Used for earth-grounding.

•

RS-485+ : Communication port for RS-485 receiver (+).

•

RS-485- : Communication port for RS-485 receiver (–).

Содержание SNB-5003

































































































































































Результаты поиска

Содержание SNB-5003

Отзывы:

Samsung SNB-5003, Руководство пользователя, Страница: 37 / 160

Результаты поиска

Содержание SNB-5003

Отзывы: