Samsung SNB-3002 страница 106 Скачать руководство пользователя

Страница: 106 / 116

PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL

THE COPYRIGHT OWNER OR CONTRIBUTORS BE

LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,

SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES

(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF

SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,

OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER

CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER

IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING

NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT

OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF

THE POSSIBILITY OF SUCH DAMAGE.
Copyright (c) 2006, Creative Labs Inc
All rights reserved.
Redistribution and use in source and binary forms, with

or without modification, are permitted provided that the

following conditions are met:

Redistributions of source code must retain the above

disclaimer.

Redistributions in binary form must reproduce the above

disclaimer in the documentation and/or other materials

provided with the distribution.

Neither the name of the Creative Labs nor the names

of its contributors may be used to endorse or promote

products derived from this software without specific prior

written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT

HOLDERS AND CONTRIBUTORS "AS IS" AND ANY

EXPRESS OR IMPLIED WARRANTIES, INCLUDING,

BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL

THE COPYRIGHT OWNER OR CONTRIBUTORS BE

LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,

SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES

(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF

SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,

OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER

CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER

IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING

NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT

OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF

THE POSSIBILITY OF SUCH DAMAGE.
Copyright (c) 2005-2012, Thomas BERNARD
All rights reserved.
Redistribution and use in source and binary forms, with

or without modification, are permitted provided that the

following conditions are met:

Redistributions of source code must retain the above

disclaimer.

Redistributions in binary form must reproduce the above

disclaimer in the documentation and/or other materials

provided with the distribution.

Neither the name of Thomas BERNARD nor the names

of its contributors may be used to endorse or promote

products derived from this software without specific prior

written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT

HOLDERS AND CONTRIBUTORS "AS IS" AND ANY

EXPRESS OR IMPLIED WARRANTIES, INCLUDING,

BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL

THE COPYRIGHT OWNER OR CONTRIBUTORS BE

LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,

SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES

(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF

SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,

OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER

CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER

IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING

NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT

OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF

THE POSSIBILITY OF SUCH DAMAGE.
Various copyrights apply to this package, listed in various

separate parts below. Please make sure that you read all the

parts.

part 1: cmu/ucD copyright notice: (BSD like)

Derivative Work - 1996, 1998-2000
Copyright 1996, 1998-2000 The Regents of the University of

California
All Rights Reserved
Permission to use, copy, modify and distribute this software

and its documentation for any purpose and without fee is

hereby granted, provided that the above copyright notice

appears in all copies and that both that copyright notice and

this permission notice appear in supporting documentation,

and that the name of CMU and The Regents of the University

of California not be used in advertising or publicity pertaining

to distribution of the software without specific written

permission.
CMU AND THE REGENTS OF THE UNIVERSITY OF

CALIFORNIA DISCLAIM ALL WARRANTIES WITH

REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS.

IN NO EVENT SHALL CMU OR THE REGENTS OF THE

UNIVERSITY OF CALIFORNIA BE LIABLE FOR ANY

SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES

OR ANY DAMAGES WHATSOEVER RESULTING FROM

THE LOSS OF USE, DATA OR PROFITS, WHETHER IN

AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER

TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION

WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

part 2: networks associates technology, inc copyright

notice (BSD)

Inc
All rights reserved.
Redistribution and use in source and binary forms, with

or without modification, are permitted provided that the

following conditions are met: yy Redistributions of source

code must retain the above copyright notice, this list of

conditions and the following
disclaimer. yy Redistributions in binary form must reproduce

the above copyright notice, this list of conditions and the

following disclaimer in the documentation and/or other

materials provided with the distribution. yy Neither the name

of the Networks Associates Technology, Inc nor the names of

its contributors may be used to endorse or promote products

derived from this software without specific prior written

permission.

Содержание SNB-3002





















































































































Результаты поиска

Содержание SNB-3002

Отзывы:

Похожие инструкции для SNB-3002

Бренды по названию

Популярные бренды

Samsung SNB-3002, Руководство пользователя

Результаты поиска

Содержание SNB-3002

Отзывы:

Похожие инструкции для SNB-3002

Бренды по названию

Популярные бренды