Samsung SNB-1000 Скачать руководство пользователя страница 50

Страница: 50 / 88

setup screen

50_

setup screen

Video analysis

From the Setup menu, select the
<

Event (

)

> tab.

Click <

Video analysis

Specify the use of Intelligent Video
Analysis.

Specify the activation time and activation
condition.

For more information about <

Activation

time

> and <

Action

>, refer to “

Alarm Input

”.

(page 49)

When done, click [

Apply (

)

Time Schedule

You can configure so that an event will occur at a scheduled time regardless of the actual
occurrence of the event.

From the Setup menu, select the
<

Event (

)

> tab.

Click <

Time Schedule

To set the timer event

Set <

Timer Event Setup

> to <

Enable

Specify the <

Activation time

Always : Always activates in operated
mode at the set interval.

Only scheduled time : Periodi-
cally activates in operated mode at a
speciﬁed time and date.

Specify the <

Transfer interval



Содержание SNB-1000

























































































Результаты поиска

Содержание SNB-1000

Отзывы:

Samsung SNB-1000, Руководство пользователя, Страница: 50 / 88

Результаты поиска

Содержание SNB-1000

Отзывы: