12
· English
wi-Fi connection setting
If you want to connect a camera to Wi-Fi, first connect the network cable and try
to make a connection to the Wi-Fi network.
1.
When you apply the power, the power status LED is lit red, and it will change
to red blinking when the booting is completed.
2.
Use the network cable (LAN cable) to connect the LAN port of the unit to the
LAN port of the Wireless Access Point.
3.
Register and select the camera according to guide of 03. Monitoring.
4.
Set your wireless network environment using the guideline <
wireless
network
> on page 23.
n
`
If you want to connect your camera to Wi-Fi, you need a hub that supports wireless
networking.
`
Using the camera's Wi-Fi Direct function, you can easily make a Wi-Fi connection from
your mobile phone.
`
When the wireless network settings are completed, remove the LAN cable.
`
If you fail to connect to the Internet service, contact the service provider for details.
Internet Service
<Modem>
<Wireless Access Point>