Wireless network
128
Connecting to a WLAN and configuring network settings
Learn to connect via an access point (AP) when you are in a range of a WLAN. You can also configure network settings.
Icon
Description
Ad hoc AP
Secured AP
WPS AP
Signal strength
Press [ ] to open AP setting options
•
If you selected a secured AP, a pop-up window appears.
Enter the required passwords to connect to the WLAN. For
information about entering text, refer to "Entering text". (p. 131)
•
If a login page appears, refer to "Using the login browser".
(p. 129)
•
If you selected an unsecured AP, the camera will connect to
the WLAN.
•
If you selected a WPS profile supported AP, select
WPS PIN
connection
, and then enter a PIN on the AP device. You can
also connect to a WPS profile supported AP by selecting
WPS
button connection
on the camera, and then pressing the
WPS
button on the AP device.
Connecting to a WLAN
1
Rotate the mode dial to
.
2
Select
,
,
,
, or
.
3
Press [
], and then select
Wi-Fi Setting
.
•
In some modes, press [
] or follow the on-screen
instructions until the Wi-Fi Setting screen appears.
•
The camera automatically searches for available AP devices.
4
Select an AP.
Back
Manual
Refresh
Samsung 1
Samsung 2
Samsung 3
Samsung 4
Samsung 5
Samsung 6
•
Select
WPS button connection
to connect to a WPS AP.
•
Select
Refresh
to refresh connectable APs.
•
Select
Add wireless network
to add an AP manually.
