Settings
82
o
Available space
: Display the amount of free space on the memory card. This option is
only available if an optional memory card is installed and mounted.
o
Mount SD card
: Prepare the memory card for use as storage in the tablet. This option is
only available if an memory card is installed, and is not already mounted. Normally, your
tablet mounts a memory card as soon as you install it.
o
Unmount SD card
: Prepare an installed memory card for safe removal or formatting.
o
Format SD card
: Permanently remove all content from an installed memory card. After
formatting, the content cannot be retrieved.
Power Saving Mode
Configure Power saving mode settings to conserve battery power.
1. Press
and then touch
>
Settings
.
2. Touch
Power saving mode
to configure options:
l
Touch
ON/OFF
to turn Power saving mode On or Off. Power saving mode must be turned
On to configure settings.
l
CPU power saving
: When enabled, the maximum performance of the tablet’s CPU
(Central Processing Unit) is disabled to conserve battery power. Touch the check box next to
the option to enable or disable it.
l
Screen power saving
: When enabled, the frame refresh rate and brightness level are
reduced to conserve power. Touch the check box next to the option to enable or disable it.
Note:
Touch
Learn about Power saving mode
to view information about these settings.
Power Saving Tips
Active applications, light levels, Bluetooth usage, and GPS functionality all act to drain your battery.
The following is a list of helpful tips that can help conserve your battery power:
n
Reduce your backlight time.
n
Turn Bluetooth off when not in use.
n
Turn Wi-Fi off when not in use.
n
Turn 4G data service off when not in use
n
Turn off GPS location services when not needed. Most applications using this function will
periodically query the GPS satellites for your current location; each query drains your battery.
n
Do not wait until your battery is completely depleted before charging your tablet. Repeating this
process of a complete discharge and recharge can over time reduce the storage capacity of any
battery.
n
Turn off Automatic application sync.