Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document wi
thout Samsung’s written authorisation is strictly prohibited.
5. Disassembly and Assembly
5-2-10. SUB UB Area Connector Remove
5-2-11. USB PBA Remove
Step 1
Disconnect the Sub UB connectors.
(Disconnect the 6 connectors and the 1 coaxial cable.)
[Caution]
- Be careful to not damage the connectors or the coaxial cable.
Step 1
Remove the binding screw from the USB PBA connector.
[Caution]
- Be careful to not damage the connector or coaxial cable.
Step 2
After desorbing the USB PBA FPCB connector with the
separation stick, remove the USB PBFA FPCB.
[Caution]
- Be careful to not damage the USB PBA FPCB connector.
Step 3
Using the separator stick, alternatingly lift up gently on both
sides separator grooves and separate the USB PBA.
