Samsung SM-A256B Скачать руководство пользователя

Страница: 56 / 122

Disassembly and Assembly

Back Cover Remove

When removing the back cover, ensure that the device is fixed on a flat surface.

Heat the microwaveable heating bag and apply it on the left edge of the back cover

for 3 minutes.

•

It is possible for the device or battery to be damaged by heat.

•

Do not heat the device in a microwave. Doing so could cause an explosion.

•

If your device’s glass breaks, the debris can cause injury to your hands or

other body parts. For your safety, attach an acrylic protective cover before

disassembling the device.

•

Follow the heating bag’s instructions for heating. The recommended time for

heating the bag is 50 seconds in a 1000 W microwave and 70 seconds in a 700 W

microwave. (Correct temperature for use: 55-65

℃

•

Be careful not to damage the device through excessive heat. (It is

recommended to disassemble the device in an area with a temperature gauge.)

Содержание SM-A256B



























































































































Результаты поиска

Содержание SM-A256B

Отзывы:

Похожие инструкции для SM-A256B

Бренды по названию

Популярные бренды

Samsung SM-A256B, Руководство по ремонту

Результаты поиска

Содержание SM-A256B

Отзывы:

Похожие инструкции для SM-A256B

Бренды по названию

Популярные бренды