SAMSUNG CAMERA
Digimax Power Pack
SLB-1437A KIT
User Manual
6
7
Thank you for purchasing the Samsung Digimax Power Pack. This manual contains important
safety and operating instructions for your power pack. Be sure to read and understand the
instructions before using your power pack.
Specifications
Specifications are subject to change without prior notice.
Be sure to read this manual carefully before using your power pack.
Keep this manual handy for future reference.
Safety Instructions
Memo
6806-2227
3. Align the (+) and (-) markings on the battery with the charger's
(+) and (-) terminals, and slide the battery into the slot until it
clicks into place. The charge indicator illuminates as red and
charging begins. When the battery is fully charged, the charge
indicator turns green.
Charging the Li-ion Battery (SLB-1437)
If the charge indicator illuminates as green when you insert the battery, your
battery is already charged to full capacity and cannot be charged any longer.
If the charge indicator blinks as red, it indicates a battery charging error.
- If the battery is not properly inserted
- If the 3 terminals (+, -, and ID) are dirty or damaged
If the battery is inserted properly and the charge indicator continues to flash,
contact the nearest Samsung Camera Service Center.
Notice
Identification of features
Using the Battery Charger
1. Insert the AC cord into the charger.
2. Plug the AC cord's power plug into the wall
outlet.
With the AC cord
When power is supplied to the charger, the charge indicator will illuminate for 1
second. (Orange Color)
Notice
ENGLISH
Cell Type
Li-ion Cell
Cell Capacity
1,440mAh
Voltage
3.7V
Charging Time
Approximately 150 Minutes
Input
AC 100-250V/ 50-60Hz
Output
Li-ion : 4.2V 0.82A
Rechargeable Battery Type
SLB-1437 Li-ion Battery
Li-ion Battery
(SLB-1437)
Battery Charger
(SBC-L2)
[ Battery Charger & Battery ]
Positive (+)
Terminal
Charge Indicator
Negative (-)
Terminal
(-) Terminal
ID Terminal
(+) Terminal
ID Terminal
