background image

Thank you for purchasing a Samsung  CCTV Zoom Lens.
Before attempting to connect or operate this product, 
please read these instructions carefully and save this manual for future use. 

ENGLISH

Motorized 10X Zoom Lens SLA-880

User’s Manual

Powerful Clear Zoom

SAMSUNG AUTO  IRIS LENS FOR CCD CAMERA OPERATING
INSTRUCTIONS

The SLA-880 is a CCD camera lens with automatic iris function, electronically
controlled by video signals, and optical 10x zoom. Distant objects can be zoomed in
and focused for clear images with a simple operation of a switch. The photometric
system, designed to provide continuous adjustable readings between peak and
average values, provides optimum image quality even in conditions where the
contrast of the object changes in a wide range. When power is cut off, the iris is
automatically closed to protect the product from strong light.

C

ONTENTS

* Specifications are subject to change without prior notice.

Samsung Techwin cares for the environment at all product manufacturing
stages to preserve the environment, and is taking a number of steps to
provide customers with more environment-friendly products. The Eco
mark represents Samsung Techwin s will to create environment-friendly
products, and indicates that the product satisfies the EU RoHS Directive.

Product appearance

3

Lens Connection 

3

Adjustment of Automatic Iris System

4

Focusing of Zoom Lens

4

Angle of View

5

Circult Diagram

6

Dimensions

6

Specification

7

1.  Product appearance

1) Mount the lens turing it clodkwise onto the camera mount.

2) Turn the lens clockwise until it stops.

3) As lens mount is constructed bo be rotatable, please adjust the lens attitude, 

if necessary. Turn the lens counterclockwise slowly till it gets the best attitude.

4) Connect the cable correctely

2.  Lens Connection 

3

Motorized 10X Zoom Lens SLA-880

CABLE 7Lines : Adjusting the zoom and focus 

Auto Iris Jack

ALC

LEVEL

Make sure to apply 8V to power zoom/focus.
If a higher voltage is applied to improve the zoom/focus speed, the motor may be damaged.
Make sure to keep the rated voltage. 

Remarks

To proceed above Level adjustment, please, set AGC switch of the camera to be off position.

4

4.  Focusing of Zoom Lens

1) Move the zoom to the extremely Tele position.
2) Operate the Focus switch to focus on the object.
3) Move the zoom to extremely Wide position, and make sure to find the

clearness of the image.

4) Again move the zoom to get the view angle of the desired object.

* Even after the process of(1) to (3), if the image is not clear, it may be necessary to

adjust the Flange back of the camera.

3.  Adjustment of Automatic Iris System

1) Light Metering Method (ALC)

It is alllowed variable selections of light metering between average and peak by
adjusting ALC potentiometer. ALC potentiometer is set at Average position at
shipment. The method of ALC adjustment is as follows.
Take off the ALC-cap on the lens cover and turn the ALC potentiometer with(-)
precision screw driver until suitable exposure is obtained.

2) Image Signal Level Adjustment (LEVEL)

Image level of video signal can be readjusted by turning the Level Potentiometer when
necessary according to the characteristics of the camera and the light conditions of the
objects. It is normally unnecessary to make sensitivity adjustment, since the video signal
level is set to an appropriate value at shipment. The method of readjustment, if necessary,
is as follow. Take off the Level-cap on the lens cover and turn the Level Pot. with(-)
precision screw driver so that an optimum level is obtained.

ALC Mode

ALC Adjustment

to Average Metering

Turn the ALC Pot. to “A” direction

to Peak Metering

Turn the ALC Pot. to “P”  direction

Picture brightness on monitor

Level Adjustment

to get brighter picture

Turn the Level Pot. to “H” direction

to get darker picture

Turn the Level Pot. to ”L” direction

Motorized 10X Zoom Lens SLA-880

For the flauge back adjustment, follwing procedure is recommended.

Set up object or a test pattern about 25 meters or more away from the camera.
Keep the iris open fully. For the AI Lens, reduce the illumination or apply a neutral
density filter in front of the lens. Or, if possible, supply DC8.5~16V power between
Vcc(+) [red] and Vcc(-) [black] without connection of Video signal [white]. At the time if
the image on the monitor is too bright, use ND Filter in front of the lens to reduce the
light to come in.
Turn the focus to extremely far position.
Turn the zoom extremely to wide position. Then observe the image on the monitor
whether it is clear.
If it is not clear, adjust flange back length of the camera by turning flange ring or
moving image sensor of the camera.
Turn the zoom extremely to tele position. Then observe the image on the monitor
whether it is clear.
If it is not clear, turn the focus to get best focus.
Repeat the process 

to 

until you get clear focus all the way through the zoom range.

Getting clear focus, please fix the flange ring or image sensor of the camera. The
flange back of C-mount is fixed to 17.526mm.

5

5.  Angle of View

It is important to know the angle of view of the lens to take in the object. Angle of view
changes with focal length of lens and image size of camera. The focal length to cover
the object can be calculated from the next formula.

* Formula for calculation 

f : focal length of lens
V : Vertical size of object
H : Horizontal size of object
D : Distance from Lens to Object
v : vertical size of image
h : horizontal size of image

Format Size

Format

1 inch

2/3 inch

1/2 inch

1/3 inch

v

9.6mm

6.6mm

4.8mm

3.3mm

h

12.8mm

8.8mm

6.4mm

4.4mm

Motorized 10X Zoom Lens SLA-880

f= v X        ... (1)

D
V

f= h X        ... (2)

D
H

6

Motorized 10X Zoom Lens SLA-880

•   Dimensions

 

 

 

 

 

Model No. 
Focal Length
Max. Aperture Ratio

Iris

Operation Range Focus

Zoom
Iris

Control

Focus
Zoom

Object Dimension 8mm
at M.O.D.

80mm
D

Angle of View

H
V

Supply Voltage
Current
Input Signal
Operating Temperature

SLA-880

8mm - 80mm
1:1.2
F1.2 - F560C
1.5m - Inf. 
8mm - 80mm
Video Auto Iris
Motorized
Motorized
124.8cm x 92.5cm
12.3cm x 9.2cm

54.3˚ - 5.8˚ 

1/2 type

44.0˚  - 4.7˚  
33.3˚  - 3.5˚ 

Iris
DC8.5V - DC16V
40mA or less
Video Signal (V or VS)
-10 C ~ +50 C

Back Focal Length
Flange Back Length
Mount
Filter Size
Tripod Screw
Dimensions
Weight

41.3˚  - 4.4˚  

1/3 type

33.3˚   - 3.5˚  
25.0˚  - 2.6˚  

Focus
DC8V
40mA or less 

15.3mm
17.526mm
C-Mount
M62 P0.75mm
1/4 - 20UNC
W70mm x H81mm x D123.5mm
670g

31.2˚ - 3.3˚  

1/4 type

25.0˚  - 2.6˚  
18.8˚  - 2.0˚  

Zoom
DC8V
35mA or less

7

•   SPECIFICATION

Motorized 10X Zoom Lens SLA-880

DECLARATION OF CONFORMITY

Application of Council Directive(s)

89 / 336 / EEC

Manufacturer's Name 

SAMSUNG TECHWIN CO., LTD

Manufacturer's Address

SAMSUNG TECHWIN CO., LTD

42, SUNGJU-DONG CHANGWON-CITY,

KYUNGNAM, KOREA, 641-716

European Representative Name

European Representative Address

Equipment Type/Environment 

CCTV CAMERA LENS

Model Name 

SLA-880

Beginning Serial NO. 

J202001

Year of Manufacture 

2007. 4. 1

Conformance to 

EN 55022 : 1988 Class A

EN 501304 : 1995 / AI : 1988

We, the undersigned, hereby declare that the equipment specified above conforms 

to the above Directive(s).

Manufacturer 

SAMSUNG TECHWIN CO., LTD 

Legal Representative in Europe 

Signature 

Signature 

Full Name 

YOUNG TAEK SON

Full Name  

Position 

QUALITY CONTROL MANAGER 

Position 

Place CHANGWON, 

KOREA

Place 

Date 

2007. 7. 4

Date 

•   Circult Diagram

Отзывы: