Checking the Digital-Signal Reception
Unlike analog channels, which can vary in reception quality from “snowy” to clear, digi-
tal (HDTV) channels have either perfect reception quality or you will not receive them at
all. So, unlike analog channels, you cannot fine tune a digital channel. But you can adjust
your antenna to improve reception of the available digital channels.
1
Press the MENU button on the remote control.
2
Push the I-Point control to high-
light the “Channel” icon and
press ENTER.
Push the I-Point control to
highlight “Check Signal
Reception” and press ENTER.
3
If the signal strength meter indi-
cates that the signal is weak,
physically adjust your antenna to
increase the signal strength.
Continue to adjust the antenna
until you find the best position
with the strongest signal.
4
When you have finished adjusting your antenna, push the I-Point
control to highlight “Done” and press ENTER.
3
.5
CHAPTER THREE
Operation
3
3