COLOR DOME CAMERA
User’s Manual
22
COLOR DOME CAMERA
User’s Manual
23
Operating Your Camera
This function reduces the background noise in a low luminance environment.
1. When the SETUP menu screen is displayed, select ‘SSNR’ by using the Function
Setup switch so that the arrow indicates ‘SSNR’ .
2. Select a desired mode using the Function Setup switch.
OFF : Deactivates SSNR. Noise is not reduced.
ON : Activates SSNR so that noise is reduced.
SSNR3
MAIN MENU
1.LENS
DC
2.EXPOSURE
3.WHITE BAL
ATW
4.SSDR
OFF
5.BACKLIGHT
OFF
6.SSNR3
ON
7.DAY/NIGHT
AUTO
3. Set the SSNR mode to ‘ON’ and press the Function Setup switch. Then you can
adjust the noise reduction level.
• You cannot set the SSNR to ‘ON’ or ‘OFF’ when the AGC mode of the EXPOSURE
menu is ‘OFF’.
• When adjusting the noise reduction level in the SSNR mode, remember that the
higher the level set, the more the noise level will be reduced, as will the
brightness of the image.
Notes
• For effective license plate observation, it needs minimum illumination and fast shutter
speed faster than 1/200sec.
• Because there can be a difference in the effectiveness of HLC according to the amount of
light area in the screen, optimize the installation angle for the best HLC performance.
• When dark, the HLC is only activated when a bright light exceeding a specific size.in NIGHT ONLY mode.
• The HLC is not activated in day light or when bright light is not present at night.in NIGHT ONLY mode.
Notes
You can display pictures in color or black and white.
1. When the SETUP menu screen is displayed, select ‘DAY/NIGHT’ by using the Function
Setup switch so that the arrow indicates ‘DAY/NIGHT’ .
DAY/NIGHT
MAIN MENU
1.LENS
DC
2.EXPOSURE
3.WHITE BAL
ATW
4.SSDR
OFF
5.BACKLIGHT
OFF
6.SSNR3
ON
7.DAY/NIGHT
AUTO
8.SPECIAL
2. Select a desired mode using the Left and Right buttons according to the picture display
you want.
AUTO : The mode is switched to ’Color‘ in a normal
environment, but switches to ’B/W‘ mode when
ambient illumination is low. To set up the switching
time for AUTO mode, press the Function Setup
switch. You can turn on or off the burst signal on
B/W mode.
- DWELL TIME : You can select the duration time about
changing the day/night mode.
…
→
5s, 7s, 10s, 15s, 20s, 30s, 40, 60s
- DURATION : You can select brightness of illumination
about changing the day/night mode.
AUTO SETUP MODE
▶
DURATION
FAST
DWELL TIME
5SEC
Press SET to Return
COLOR : The picture is always displayed in color.
B/W : The picture is always displayed in black and white.
-BURST MODE : You can turn on or off the burst signal on
B/W mode.
-
IR MODE :
When IR LED is turned on in B/W, the objects
can be clearly identified due to the function
that decreases screen saturation of objects within a short distance.
· TOP/DOWN/LEFT/RIGHT : Adjust the range according to the location of objects.
-
IR LEVEL : Select LOW when objects appears within a short distance or select
HIGH when objects appears within a long distance on the screen.