Samsung SID-562, Руководство пользователя, Страница: 14 / 17

COLOR DOME CAMERA User Guide
26
COLOR DOME CAMERA User Guide
27
Operating Your Camera
• MD areas show only MOTION DET menu. Therefore, MD areas don’t display on the
monitor screen.
• When motion is detected, “MOTION DETECTION” expression is displayed on the screen.
Notes
• When using AC power at 60Hz(PAL : 50Hz) frequency, you can use the L/L type synchronization.
• When the power is DC 12V, the SYNC menu is fixed to the 'INT' mode.
Notes
PRIVACY : Hide an area you want to hide on the screen.
… … … … When the SPECIAL menu screen is displayed, using
the Function Setup switch so that the arrow
indicates ‘PRIVACY’.
… … … Set up the mode using the Function Setup switch.
MOTION DET : You can monitor activity more efficiently,
because a signal is generated by the camera
whenever motion is detected.
… … … …
When the SPECIAL menu screen is displayed, press the Function
Setup switch so that the arrow indicates ’MOTION DET‘.
… … …
Set up the mode using the Function Setup switch.
- SENSITIVITY : You can select up to 8 MD areas. When SENSITIVITY number is high, motion
detection sensitivity is increased to recognize even small movement.
- AREA MODE : Determines whether to use the MD area selected in SENSITIVITY.
- SEL POS : Determines which of the 4 vertices of each MD area is to be used.
- YPOS : Determines the coordinate of the vertical axis for SEL POS.
- XPOS : Determines the coordinate of the horizontal axis for SEL POS.
- FILL
→
SET : Fills in a selected MD area. The color of filling is sequentially selected as brown,
orange, blue, cyan, yellowish green, yellow, magenta and red.
- RETURN : Select this to save the MOTION DET menu settings and return to the SPECIAL menu.
- AREA SEL : You can select up to 8 PRIVACY areas.
- AREA MODE : Determines whether to use the area
selected in the AREA SEL, and the size and
position of the area.
- MASK COLOR : Determine area color. You can select Gray,
Green, Red, Blue, Black, White.
• The chance of resolution decrease is existed because DIS function uses the digital zoom.
• DIS doesn’t operate when background illumination is too low.
• DIS doesn’t operate when object pattern is monotonic as like sky or white wall.
• If DIS is enabled, the digital zoom is not configured to less than 46 level.
Notes
COMM ADJ (Communication Adjustment):
This function sets up the camera communication
status when controlling the camera through an
external control device.
… … …
When the SPECIAL menu screen is displayed,
press the Function Setup switch so that the arrow
indicates ‘COMM ADJ’.
… … … Set up the mode using the Function Setup switch.
- CAM ID : Determines the camera's identification number (between 0 and 255).
- BAUD RATE : You can select 2400/4800/9600/19200/38400/57600 bps.
- UART MODE : You can select NONE, EVEN or ODD for the parity bits.
- RET PKT : Determines whether to send a command back to the controller device
when a communication control command is sent to the camera.
- DISP CAM ID : Display camera title on top left corner of the screen.
Press the Function Setup switch in the EXIT menu to save the current settings and exit the
MAIN SETUP menu.
LANGUAGE : You can select the menu language according to your
requirements.
RESET : Resets the camera settings to the factory defaults.
RETURN : Select this to save the SPECIAL menu settings and return to the MAIN SETUP
menu.
EXIT
- TRANSP : Determine the transparency of selected area as
controlling number from 0 to 3.
- RETURN : Select this to save the PRIVACY menu
settings and return to the SPECIAL menu.
DIS (Digital Image Stabilizer) :
This function mitigates any picture movement due to external factors such as wind.