COLOR DOME CAMERA
User’s Manual
20
COLOR DOME CAMERA
User’s Manual
21
Operating Your Camera
OFF : Not being used
3. Select a desired mode using the Function Setup switch and press the switch.
• Because there can be a difference in the effectiveness of HLC according to the amount of
light area in the screen, optimize the installation angle for the best HLC performance.
• In a dark environment, the HLC is only activated when a high light that is larger than a
certain area is present.
• The HLC is not activated in light or overly dark conditions.
Notes
Select ‘BLC’ to adjust the area to be
enhanced and enhancement level.
HLC : Enables a user to select a mask
color of high light area from a
picture.
This function reduces the background noise in a low luminance environment.
1. When the SETUP menu screen is displayed, select 'SSNR' by using the Function
Setup switch so that the arrow indicates 'SSNR' .
SSNR
MAIN SETUP
1.LENS SHADE
ON
2.EXPOSURE
3.WHITE BAL
ATW
4.BACKLIGHT
OFF
5.SSNR
ON
6.DAY/NIGHT
COLOR
2. Select a desired mode using the Function Setup switch.
Deactivates SSNR so that noise is not reduced.
OFF : Deactivates SSNR so that noise is not reduced.
ON : Activates SSNR so that noise is reduced.
3. Set the SSNR mode to 'ON' and press the Function
Setup switch. Then you can adjust the noise reduction
level.
2. Select a desired mode using the Function Setup switch according to the picture display
you want.
• You cannot set the SSNR to 'ON' or 'OFF' when the AGC mode of the EXPOSURE
menu is 'OFF'.
• When adjusting the noise reduction level of the SSNR mode, remember that the
higher the level set, the more the noise level will be reduced but that after image
may also occur.
Notes
DAY/NIGHT
MAIN SETUP
1.LENS SHADE
ON
2.EXPOSURE
3.WHITE BAL
ATW
4.BACKLIGHT
OFF
5.SSNR
ON
6.DAY/NIGHT
COLOR
7.IMAGE ADJ
You can display pictures in color or black and white.
1. When the SETUP menu screen is displayed, select ‘DAY/NIGHT’ by using the
Function Setup switch so that the arrow indicates DAY/NIGHT.