COLOR DOME CAMERA
User’s Manual
22
COLOR DOME CAMERA
User’s Manual
23
2. Select a desired mode using the Function Setup switch according to the picture display
you want.
AUTO : The mode is switched to ‘Color’ in a normal environ
ment, but it is switched to ‘B/W’ mode when
ambient illumination is low. To set up the switching
time for AUTO mode, press the Function Setup
switch.
COLOR : The picture is always displayed in color.
B/W : The picture is always displayed in black and white.
Please press the Function Setup switch to turn on or
off the burst signal on B/W mode.
- DWELL TIME : You can select the duration time about
changing the DAY/NIGHT mode.
→…
5s, 7s, 10s, 15s, 20s, 30s, 40s, 60s
• You cannot set the SSNR to ‘ON’ or ‘OFF’ when the AGC mode of the EXPOSURE
menu is ‘OFF’.
• When adjusting the noise reduction level of the SSNR mode, remember that the
higher the level set, the more the noise level will be reduced but that after image
may also occur.
Notes
DAY/NIGHT
Operating Your Camera
MAIN SETUP
1.LENS
DC
2.EXPOSURE
3.WHITE BAL
ATW
4.BACKLIGHT
OFF
5.SSNR
ON
6.DAY/NIGHT
AUTO
7.IMAGE ADJ
You can display pictures in color or black and white.
1. When the SETUP menu screen is displayed, select ‘DAY/NIGHT’ by using the
Function Setup switch so that the arrow indicates ‘DAY/NIGHT’.
• You cannot control the DAY/NIGHT menu when AGC in the EXPOSURE menu is
‘
OFF
’
.
At this time, the exchange between DAY mode and NIGHT mode operates as like
selecting
‘
COLOR
’
mode.
• The camera may focus less well under infrared illumination than under normal illumination.
Notes
2. Select a desired mode using the Function
Setup switch.
1. When the SETUP menu screen is displayed,
select ‘IMAGE ADJ.’ by using the Function
Setup switch so that the arrow indicates
‘IMAGE ADJ.’
MAIN SETUP
1.LENS
DC
2.EXPOSURE
3.WHITE BAL
ATW
4.BACKLIGHT
OFF
5.SSNR
ON
6.DAY/NIGHT
AUTO
7.IMAGE ADJ
8.SPECIAL
IMAGE SETUP
1. V-REV
OFF
2. H-REV
OFF
3. D-ZOOM
OFF
4. SHARPNESS
ON
5. RETURN
IMAGE ADJ.
V-REV : You can flip the picture vertically on the screen.
H-REV : You can flip the picture horizontally on the screen.
D-ZOOM : You can use a digital zoom of x2~x10.
SHARPNESS : As you increase this value, the picture
outline becomes stronger and clearer. Adjust
this value appropriately depending on the
sharpness of the picture.