COLOR DOME CAMERA
User’s Manual
20
COLOR DOME CAMERA
User’s Manual
21
Operating Your Camera
BLC
OFF
MAIN SETUP
1.LENS
DC
2.EXPOSURE
3.WHITE BAL
ATW
4.BACKLIGHT
OFF
5.SSNR
ON
2. Select a desired mode using the Function Setup switch depending on the camera
purpose.
BLC : Enables a user to directly select a desired area from a picture, and to view the
area more clearly.
OFF : Not being used
3. Select a desired mode using the Function Setup switch and press the switch.
• Because there can be a difference in the effectiveness of HLC according to the amount of
light area in the screen, optimize the installation angle for the best HLC performance.
• In a dark environment, the HLC is only activated when a high light that is larger than a
certain area is present.
• The HLC is not activated in light or overly dark conditions.
Notes
Select ‘BLC‘ to adjust the area to be
enhanced and enhancement level.
HLC :
Enable a user to select a mask color
of high light area from a picture.
HLC (High Light Compensation) :
If there is a high light installed in a limited environment such as an apartment
parking garage or gas station entrance, removing the high light makes it possible to
view car license plates efficiently.
- DAY : In normal daylight conditions, the HLC is not activated.
- NIGHT : If a high light that is larger than a certain size is present on the screen,
remove the high light to see license plates clearly.
This function reduces the background noise in a low luminance environment.
1. When the SETUP menu screen is displayed, select ’SSNR‘ by using the Function
Setup Switch so that the arrow indicates ’SSNR‘ .
SSNR
MAIN SETUP
1.LENS
DC
2.EXPOSURE
3.WHITE BAL
ATW
4.BACKLIGHT
OFF
5.SSNR
ON
6.DAY/NIGHT
AUTO
2. Select a desired mode using the Function Setup switch.
OFF : Deactivates SSNR so that noise is not reduced.
ON : Activates SSNR so that noise is reduced.
3. Set the SSNR mode to ’ON‘ and press the Function
Setup switch. Then you can adjust the noise reduction
level.