COLOR CCD CAMERA
User’s Manual (SID-370)
20
COLOR CCD CAMERA
User’s Manual (SID-370)
21
• Since the following symptoms may occur according to the ambient illumination
when BLC is selected, set it to OFF.
1
Color or screen changes unnaturally.
2
Noise appears in the bright part of the screen.
• Since the performance of the BLC function may be affected by the area of the
bright part of the screen, optimize the installation angle for the best BLC
performance.
• If you increase LIMIT, the screen display may be distorted.
• For high performance of BLC function, We recommend that you set IRIS to AUTO in
the EXPOSURE setup.
• Activating BLC may cause the camera to repeat the Auto Focus operation
depending on lighting conditions. It is recommended that you use the Focus Setup
menu in One-Push or Manual mode.
• Smart Zoom and BLC cannot be used in conjunction with each other:
• Setting up BLC and then Smart Zoom automatically cancels BLC.
• Setting up Smart Zoom and then BLC automatically cancels Smart Zoom.
Notes
This product has a feature that allows you to observe movements of objects in 4
different areas on the screen, and the words ‘MOTION DETECTED’ appear on the
screen when movement is detected; hence a single individual can conduct
supervision efficiently. The camera detects an object’s movement by sensing
disparity of outline, and level of brightness and color. The camera receives detection
signal from MD output terminal.
• Please press the Function Setup Switch.
- OFF: MOTION DETECTION mode is cancelled.
- ON: Any motion in the selected areas is observed.
AREA SEL :
You can select the area you wish to observe from the 8 area.
AREA MODE :
Determines whether to use the MD area selected in SENSITIVITY
SENSITIVITY :
You can select up to 8 MD areas. When SENSITIVITY number is high,
motion detection sensitivity is increased to recognize even small
movement
SMART ZOOM :
Smart zoom is operated in connection with MOTION DETECTION.
When the SMART ZOOM function is ‘ON’ while the MOTION
DETECTION mode is ‘ON’, the zoom goes to the TARGET ZOOM
position once motion is detected. Once the zoom action is finished
and ‘DWELL TIME’ has passed, the zoom returns to the ‘START
Motion Detection
MD SETUP
▶
AREA SEL
AREA1
AREA MODE
ON
SENSITIVITY LOW
SMART ZOOM ON
END
AREA SETUP
▶
TOP
3
BOTTOM
6
LEFT
3
RIGHT
6
END
|
|||||||||||||||||||||||||
|
|
||||||||||||||||||||||||
|
|||||||||||||||||||||||||
|
|
||||||||||||||||||||||||
SMART ZOOM SETUP
▶
START ZOOM
X1
TARGET ZOOM
X5
DWELL TIME
5 SEC
END
HLC SETUP
▶
LEVEL
LOW
MASK COLOR 5
END
||||||||||||
|
|||||||||||||
• Select ‘HLC’ to adjust the HLC MASK COLOR and
LEVEL.
OFF :
Deactivates the BACKLIGHT function.
3. Select a desired mode moving left or right direction
of Function Setup Switch. and press the Function
Setup Switch.
• Select ‘BLC’ to adjust the area to be enhanced and
enhancement level.
BLC SETUP
▶
LEVEL
LOW
TOP
30
BOTTOM
70
LEFT
30
RIGHT
70
END
|||||
|
||||||||||||||||||||
|||||
|
||||||||||||||||||||
||||||||||||||||||
|
|||||||
||||||||||||||||||
|
|||||||
Operating Your Camera