Samsung SHC-750 Скачать руководство пользователя страница 5

COLOR CCD CAMERA

COLOR CCD CAMERA

User’s Manual

User’s Manual

9

8

Installation of this product by unqualified
personnel is strictly prohibited.

Experience and technical know-how are required
for proper installation, and to prevent possible fire
or electric shock. Please consult an authorized
retailer for any installation questions.

If the camera overheats or smoke is
noticed, turn the power off immediately.

Do not install the product in an area of high humidity
or near flammable materials (e.g. oil or gas). 

Using the product in an incorrect environment may
cause fire, electric shock, or damage to the product.  

Do not install the product unless the location
can fully support the product’s weight.

If it is not properly supported, the product may fall.

Do not handle power plugs with
wet hands.

It may cause electric shock.

Do not insert foreign objects into the
product or disassemble the product.

It may cause fire or damage the product.

It may cause fire.

Do not expose the product to extreme
heat or cold.

Do not expose the product to extreme heat or cold. Temperatures outside
its operating temperature range (-10˚C(14˚F) ~ 50˚C(122˚F)) may reduce
image quality or cause product malfunction. Pay special attention to
ventilation around the product in warm locations.

Fluctuating light levels caused by an unstable
fluorescent lamp, for example, may cause product
malfunction.

Do not drop, shake, or apply severe
impact to the product.

It may damage the product.

Excessive light may cause fatal damage to the CCD.

This is the most important part of the camera. Be careful
not to leave any marks, including fingerprints, on the glass.

Do not expose the product to rain or water,
or place it near radioactive materials.

Water inside the camera may cause product
malfunction.

Do not use the product in areas where the
illumination levels fluctuate frequently.

Do not point the camera towards a
strong light source such as the sun.

Do not touch the glass on the front of
the camera.

Precautions

Содержание SHC-750























Отзывы: