Samsung SHC-750 Скачать руководство пользователя страница 3

EMCCD for Extreme Light 
Sensitivity

A 1/2 inch Electron Multiplying Charge
Coupled Device (EMCCD) and advanced
digital signal processing technology are
employed to produce sharper shapes and
colors in the subject image, even under
ultra low light conditions.  This is suitable
for 24-hour outdoor surveillance where
available light levels can get extremely low. 
-Color: 0.008Lux (F1.2, EIAJ)
-B/W: 0.0005Lux (F1.2, EIAJ)

SHC-750 DSP

The high performance DSP capability of the
SHC-750 effectively eliminates low light
noise and produces not only clearer images
but also sharper colors. The resulting
image is vivid and precise. 

Day & Night

It automatically distinguishes between day
and night, and switches to the appropriate
mode. Color mode is used during the day
to produce optimum color images; B/W
mode is used at night to deliver clearer
images in the dark. 

Video-Drive/DC-Drive Lens
Support 

Video-drive lens or DC-drive lens selection
is by a simple switch control. The
brightness of the video lens can be
adjusted without fine VR adjustments.

Samsung Super Noise Reduction
(SSNR) 

Samsung original SSNR technology effectively
eliminates low light noise, increases horizontal
resolution, and improves the S/N ratio. 
The resulting image is clear and vivid even in
low light conditions.

On-Screen Text Display & RS-485
Communication Technology

Camera functions may be controlled using
the on-screen text displays.
RS-485 communication technology enables
long-distance remote control of the camera
functions.

Motion Detection

The product’s Motion Detection feature detects
moving subjects and generates a signal
accordingly. An alarm device may be connected
directly (i.e. with no external sensor) to the
product for more effective security.

Extra Features

Extra features include Sens-Up, Privacy,
Sharpness, Smear Cancel, and Mirror.

Major Functions and Features

This information is provided to ensure your safety and to prevent any losses, financial or
otherwise. Please read it carefully and use the product accordingly.

Warning/Attention/Special Mark Messages 

Indicates “Never Allowed.”

Indicates “No Disassembling.”

Indicates  Must Observe.

Ignoring this information may result in material loss and/or serious
personal injuries including death.

Samsung Techwin cares for the environment at all product manufacturing
stages to preserve the environment, and is taking a number of steps to
provide customers with more environment-friendly products.The Eco mark
represents Samsung Techwin s will to create environment-friendly products,
and indicates that the product satisfies the EU RoHS Directive.

Warnings & Cautions

Содержание SHC-750























Отзывы: