44
A list of recent calls is displayed.
2.
Touch and hold the call you want to add to the Reject List.
3.
Tap
Add to reject list
.
4.
At the
Add to reject list
prompt, tap
OK
.
Future calls from this number will be rejected and sent to
your voicemail.
Call Duration
1.
From the Home screen, tap
➔
Logs
.
2.
Press
➔
Call duration
.
3.
The following times are displayed for Voice and Data:
• Last call
: shows the length of time for the last call.
• Dialed calls
: shows the total length of time for all calls made.
• Received calls
: shows the total length of time for all calls received.
• All calls
: shows the total length of time for all calls made and
received.
4.
You may reset these times to zero by pressing
then
tapping
Reset
.
Options During a Call
Your phone provides a number of control functions that you can
use during a call.
Adjusting the Call Volume
During a call, to adjust the earpiece volume, use the
Volume
keys
on the left side of the phone.
䊳
Press the
Up
volume key to increase the volume level and
press the
Down
volume key to decrease the volume level.
From the Home screen, you can also adjust the ringer volume
using these same keys.
In-Call Options
During an active call there are several functions available by
tapping a corresponding on-screen button.
•
Hold
: place the current active call on hold.
•
Add call
: displays the dialer so you can call another person.
•
Keypad
: displays the on-screen keypad, where you can enter
number using DTMF (Dual Tone Multi-Frequency).
•
End call
: terminates the call.
•
Speaker
: routes the phone’s audio through either the speaker or through
the earpiece.
–
Tap
Speaker
to route the audio through the speaker. (You can adjust the
speaker volume using the volume keys.) A green line will appear under
the Speaker button.
–
Tap
Speaker
again
to use the phone’s earpiece (see
Speakerphone During an Active Call”
on page 47.) The green line
will disappear when Speaker is not activated.
Содержание SGH-T999V
Страница 8: ...iv ...
Страница 161: ...Applications 153 3 Enter the details of the upload and select Upload ...