COLOR CCD CAMERA
User Guide
16
COLOR CCD CAMERA
User Guide
17
✽
Select one of the following 5 modes, as appropriate for your purpose.
ATW
:
Sel ect this when the color temperature is between 1800ºK and
10500ºK
INDOOR :
Select this when the color temperature is between 4500ºK and 8500ºK.
OUTDOOR :
Sel ect this when the color temperature is between 1800ºK and
10500ºK. (sodium light inclusion)
AWC
→
SET :
To f ind the optimal setting for the current luminance environment in this
mode, set the point the camera towards a sheet of white paper and press the
SET button. If the environment changes,
readjust it.
MANUAL :
Select this to fine-tune White Balance
manually. Set White Balance first by
using the ATW or AWC mode. After
that switch to MANUAL mode, fine-
tune the White Balance and then press
the SET button.
• White Balance may not work properly under the following conditions. In this case select
the AWC mode.
1
When the color temperature of environment surrounding the subject is out of the control
range
2
When the ambient illumination of the subject is dim.
3
If the camera is directed towards a fluorescent light or is installed in a place where
illumination changes dramatically, the White Balance operation may become unstable.
Notes
2. Select a desired mode using the Left and Right buttons depending on the camera pupose.
BACKLIGHT
This camera is designed so that it delivers a distinctive subject and background at
The same time, even when the subject is in backlight, unlike conventional cameras,
By adopting a proprietary SV-IV DSP chip.
1. When the SETUP menu screen is displayed, select ‘BACKLIGHT’ by using the Up
and Down buttons so that the arrow indicates ‘BACKLIGHT’.
WDR :
Wh en there are both bright and dark areas at the same time, this mode
makes both areas distinctive.
BLC :
En ables a user to directly select a desired area from a picture, and to view the
area more clearly.
HLC(High Light Compensation) :
If the scene contains extremely bright light areas
such as; from car headlight, the light can mask out
much of the on-screen detail.
WDR
OFF
Operating Your Camera
MAIN SETUP
WHITE BAL
ATW
BACKLIGHT
OFF
MOTION DET
OFF
WHITE BAL MANUAL SETUP
RED
117
BLUE
93
▶
END
|||||||
|
||||||||||||||||||
|||||
|
||||||||||||||||||||
Press SET to Return
WDR SETUP
▶
LIMIT
MEDIUM
LEVEL
50
END
||||||||||||
|
|||||||||||||
OFF :
Deactivates the BACKLIGHT function.
3. Select a desired mode using the Left and Right
button and press the SET button.
• Select ‘WDR’ to adjust the WDR LIMIT and LEVEL.
- LIMIT : Adjust the WDR Sensitivity by selecting
LOW, MEDIUM or HIGH.
- LEVEL : Adjust the WDR Brightness by controlling
1~100.