COLOR CCD CAMERA
User’s Manual
21
COLOR CCD CAMERA
User’s Manual
20
MAIN SETUP
1.LENS
DC
2.EXPOSURE
3.WHITE BAL
ATW
4.BACKLIGHT
OFF
5.SSNR
ON
6.DAY/NIGHT
AUTO
HLC (High Light Compensation) :
If there is a high light installed in a limited environment such as an apartment parking
garage or gas station entrance, removing the high light makes it possible to view car
license plates efficiently.
- DAY : In normal daylight conditions, the HLC is not activated.
- NIGHT : If a high light that is larger than a certain size is present on the screen,
remove the high light to see license plates clearly.
OFF : Not being used
HLC MASKING AREA
HLC ON
HLC OFF
3. Select a desired mode using the Left and Right buttons and press the SET button.
This function reduces the background noise in a low luminance environment.
1. When the SETUP menu screen is displayed, select ’SSNR’ by using the Up and Down
buttons so that the arrow indicates ’SSNR’ .
2. Select a desired mode using the Left and Right buttons.
OFF : Deactivates SSNR. Noise is not reduced.
ON : Activates SSNR so that noise is reduced.
• Because there can be a difference in the effectiveness of HLC according to the amount of
light area in the screen, optimize the installation angle for the best HLC performance.
• In a dark environment, the HLC is only activated when a high light that is larger than a
certain area is present.
• The HLC is not activated in light or overly dark conditions.
Notes
SSNR
3. Set the SSNR mode to ‘ON’ and press the SET button. Then you can adjust the noise
reduction level.
Select ‘BLC’ to adjust the area to be
enhanced and enhancement level.
HLC : Enable a user to select a mask color
of high light area from a picture.
• You cannot set the SSNR to ‘ON’ or ‘OFF’ when the AGC mode of the EXPOSURE menu
is ‘OFF’.
• When adjusting the noise reduction level of the SSNR mode, remember that the higher
the level set, the more the noise level will be reduced but that after image may also occur.
Notes
How to Use the Camera