manualshive.com logo in svg

Samsung SDC-313A Series, Инструкция по эксплуатации, Страница: 19 / 20

Поделиться
Скачать
Samsung SDC-313A Series Скачать руководство пользователя страница 19

Troubleshooting

If you have trouble operating your camera, refer to the following table. If the
guidelines do not enable  you to solve the problem, contact an authorized
technician.

Nothing appears on
the screen. 

The video image is
not clear.

The screen is dark.    

There is a problem with the
camera operation. The
camera surface is too hot
and black stripes appear on
the screen. 

Problem

• Please check the power connection.
• Please check the video signal line connection.
• Please check and make sure that the auto lens

switch is set to DC (VIDEO) when using a DC
(VIDEO) lens.

• Please check the Brightness of Auto Iris lens.

• Please check if the lens is clean.

Please clean the lens with a clean cloth or brush.

• Please adjust the contrast feature of the

monitor.

• Please make sure that the screen is not exposed

directly to a bright light. 
Please move the camera if necessary.

• Please readjust the back focus of the camera.

• Please adjust the contrast feature of the monitor.  
• If you have an intermediate device, set the 75

Ω

/

Hi-z properly, and check the terminals. (refer to
page 18)

• Please check if an auto iris lens is being used

and adjust the brightness level.

• Please check if an appropriate power source to

the camera complies with the manufacturer's
standard requirement, or if the voltage keeps
changing.

Solution

The MOTION
DETECTION function
is not working.

Colors are not quite
right.   

The screen is
flickering.    

L/L mode isn't able to
be selected.  

L/L mode is not
available.

SENS-UP function is
not working.

Problem

• Please check if 'MOTION DETECTION' mode is

turned on.

• Please check if the MD LEVEL is too low. 
• Please check the setting of the MD AREA.        

• Please check the 'WHITE BAL' setting. (Please

refer to page 25)

• Please check if the camera is facing directly into

sunlight or fluorescent light.                                   

• Please check if an auto iris lens is being used.  
• Please check the connection of the lens connector

cable.

• Have you connected your camera to DC power

source? Connect it to AC power source.

• Please check the frequency of power supply

(60Hz for NTSC, 50Hz for PAL).

• Please check if the AGC menu is set to the OFF

position.

• Please check if the SHUTTER menu is set to

MANUAL mode.

• Please check the limit of SENS-UP AUTO mode.

Solution

COLOR CCD CAMERA

User’s Manual

37

COLOR CCD CAMERA

User’s Manual

36

Содержание SDC-313A Series





















Отзывы:

Нет отзывов