Getting Started 3
System Requirements
•
An always-on broadband Internet connection with a minimum speed
and available bandwidth of 1 MB (3.1 Mbps to support the maximum
EVDO data rate.)
Note:
Satellite, MiFi or wireless connections are not supported.
•
An available Ethernet (LAN) port on either your broadband modem or a
router connected to the modem.
Note:
If you are connecting your Verizon Wireless Network Extender to a
router, please ensure it supports Virtual Private Networking (VPN).
Although most routers support this functionality, refer to your router’s
product documentation to confirm compatibility.
Quick Setup
Setting up service on your new Verizon Wireless Network
Extender is fast and easy. This section outlines the procedures
needed to quickly set up the Network Extender.
Note:
You may also visit
www.verizonwireless.com/b2c/store/
accessory?action=gotoSetup
to view the online setup and usage tutorial.
Follow the onscreen prompts.
1.
Confirm your package contains all components.
2.
Review the "Important Safety Information" on page 20
before installing the Network Extender.
3.
Make sure that both your router and your Internet
broadband modem are functioning properly. Refer to your
particular product’s documentation for more information.
4.
If possible, place the Network Extender near a window in a
central location.
5.
Connect one end of the included Ethernet cable to an open
LAN port on the router (1) and connect the other end to the
WAN port located at the rear of the Network Extender (2).
Note:
Plug the Ethernet cable into the Network Extender before connecting
the power supply.
1HWZRUN([WHQGHU
5RXWHU
Internet
Internet
ISP
ISP
