CONFIRMING NETWORK EXTENDER
OPERATION
LED
Function
Description
PWR
Power
Solid blue: normal
No light: abnormal
SYS
System
connected
Solid blue: normal
Blinking red: establishing
an initial network
connection
Solid red: abnormal
GPS
GPS Signal
Solid blue: normal (GPS
signal is received)
Blinking blue or red:
while searching for GPS
signal
Solid red: abnormal
(GPS signal cannot be
received, the external
GPS antenna is required)*
WAN
WAN (Ethernet
connection)
Solid blue: normal
Blinking blue: data
communication
No light: abnormal
5. Allow 3 - 5 minutes for the base station
to complete the startup sequence and
detect both its connections and available
communications. The first time the base
station is used, it may take as long as one
hour for the initial GPS acquisition.
Your Network Extender is ready for use when all
four LEDs are solid blue.
Note: The optional GPS antenna cable is required
only when the external GPS antenna installation
is necessary.
TROUBLESHOOTING
What if my GPS LED is still red after one hour?
If the GPS LED is still red after one hour, you need
to relocate the GPS antenna to receive a stronger
signal. See “External GPS Antenna” in the User
Guide.
How do I know my phone is connecting
through the Network Extender?
When dialing
#
48 on your wireless phone, an an-
nouncement will tell you if you are within range
of the Network Extender. In addition, you will
hear a short double tone on your wireless phone
whenever making or receiving a call. The tone is
played at the beginning of the call.
FOR MORE INFORMATION
Refer to the Network Extender User Guide
•
that came with your device.
Visit verizonwireless.com/support
•
Call Customer Service toll free at 800-922-
•
0204 or *611 from your Verizon Wireless
mobile phone.
Quick Start Guide
Verizon Wireless Network Extender
EP68-00361A
© 2009 Verizon Wireless. All rights reserved. Verizon Wireless is a
trademark of Verizon Trademark Services LLC.
* See “External GPS Antenna” in the User Guide.
SCS-26UC4
