COLOR CCD CAMERA
User Guide
12
COLOR CCD CAMERA
User Guide
13
Connecting to Monitor
Please connect the video output terminal located on the back of the camera to the
monitor.
CCD Camera
CCD Camera
Intermediate
End monitor
Monitor
• The connection method varies depending on the type of monitor and accessories.
Please refer to the user's manual for each instrument.
• Please turn off the power when connecting.
• Please select Hi-Z on the 75Ω/Hi-Z switch for the intermediate video TV set and
select 75Ω for the Intermediate device as shown in the picture below.
Connection
The recommended adaptor specification for SCO-2120RN/P is DC 12V/4A, AC
24V/1A over.
Please check the standard power requirement before connecting the power.
Connecting to Power
When the resistance value of copper wire is at [20°C(68°F)]
Copper wire size(AWG)
#24(0.22mm
2
)
#22(0.33mm
2
)
#20(0.52mm
2
)
#18(0.83mm
2
)
Resistance value(Ω/m)
0.078
0.050
0.030
0.018
Voltage drop(V/m)
0.028
0.018
0.011
0.006
• As shown in the table above, voltage decreases as the wire gets longer.
Therefore having an excessively long distance between the power adaptor and the
camera may affect the camera's performance.
✽
Standard voltage for camera operation : DC 12V±10% / AC 24V±10%
✽
There may be some deviation in voltage drop depending on the type of wire and the manufacturer.
• Please use a power adaptor that meets the required standards.
• Please connect the power after installation.
Notes
