COLOR CCD CAMERA
User Guide
14
COLOR CCD CAMERA
User Guide
15
t8IFONBLJOHBDPOUSPMTZTUFNUPDPOUSPMUIFDBNFSBQMFBTFVTFUPUIF
QSPUPDPM 4".46/(51&-$011&-$0%7*$0/1"/"40/*$#04$))0/&:&--
4".46/(&
t8IFOZPVDPOOFDUJOHUP34$0/530-5&3.*/"-QMFBTFQFFMPGGUIFPVUFS
TLJOJOTJEFUIF34$0/530-5&3.*/"-
t*ODBTFPG4$$DPOOFDUJPODIBOHFDPNNVOJDBUJPONPEFUP
Ø
&
Ù
at
Ø
$PNNVOJDBUJPO
configuration
Ù
NFOV 'PSNPSFJOGPSNBUJPOSFGFSUP4$$NBOVBM
Notes
Using Coaxial Communications
DVD
SOC-4160
t
Coaxial Communications System
t
OSD Control method
%73
Distance
Recommended Cable Specification
300m
3C2V(RG-59/U)
450m
5C2V(RG-6/U)
600m
7C2V(RG-11/U)
– Video Cable
The camera's video output port is connected to the monitor with a BNC coaxial cable,
shown below : If the distance between the camera and the monitor exceeds the
recommended maximum, please use an auxiliary video amp.
t*GUIFDBNFSBJTDPOUSPMMFEUISPVHIDPBYJBMDPNNVOJDBUJPOQMFBTFVTFBWJEFPBNQ
intended for coaxial communications. Regular video amps do not transfer coaxial
signals.
Notes
Using RS-485 communication will enable you to control the OSD menu from a SAMSUNG
TECHWIN System Controller or DVR.
(1) Connection to a PC.
Connect the camera to the PC via a RS-485 converter using RS-485 and a serial cable.
EX) SERIAL PORT OF THE PC(COM1)
Ą
SERIAL CABLE
Ą
RS-485 CONVERTER
Ą
RS-485
CONTROL CABLE
Connecting to RS-485 Control Cable
$0/530-$"#-&
41&$
WHITE (TRX+)
RS-485+
BLCAK (TRX-)
RS-485-
* RS-485 Communication establishment initial value
$POUSPM#PBSE$POOFDUJPO1PSU
RS-485 Control Port
(+) CONNECTION TERMINAL
WHITE (TRX+)
(-) CONNECTION TERMINAL
BLACK (TRX-)
Item
Camera ID
BAUD RATE
UART MODE
RET PKT
*OJUJBMWBMVF
1
9600
8-NONE-1
ENABLE
(2) Connection to a DVR or System Controller.
Connect the RS-485 cable to the connection ports of the DVR or System Controller.
WHITE (TRX+)
BLACK (TRX
-)
$".&3"
DVR
$0/530--&3
SET
MENU/ENTER
OSD KEY
UP
UP KEY
JOYSTICK UP
DOWN
DOWN KEY
JOYSTICK DOWN
LEFT
LEFT KEY
JOYSTICK LEFT
RIGHT
RIGHT KEY
JOYSTICK RIGHT
RS-485 communication control
Connection
t
#/$
t34