Samsung SCD-5020, Руководство пользователя, Страница: 30 / 39

30_ setup
setup
-
SEL POS/ XPOS/ YPOS : Adjust the size and position of the selected area.
-
RETURN : Return to the SPECIAL menu.
y
DIS (Digital Image Stabilizer) : This function mitigates any picture movement due to external factors
such as wind.
y
VIDEO ANALYTICS
❶ If the SPECIAL menu screen is displayed,
use the Function Setup switch so that the
arrow indicates ‘VIDEO ANALYTICS’.
❷ Select a desired mode using the Function
Setup switch.
- TAMPERING : If the screen view is obstructed
or the camera location is
changed, tampering detection,
you can issue an event signal
by setting it.
y SENSITIVITY : Set the sensitivity to tampering detection.
y
ALARM OUT : Outputting of detection signals can be set.
` OSD : Display signals on the screen.
`
RETURN : Return to the TAMPERING menu.
y
RETURN : Return to the VIDEO ANALYTICS menu.
M
` In the following cases, the initially set tampering detection function can malfunction.
`
In a monitoring environment with a simple background or an environment with low light level or at night, the
detection performance can deteriorate.
`
Sudden changes in the lighting and severe camera shaking can be wrongly detected as tampering.
` Immediately after tampering, the camera tampering detection can take up to a max of five seconds.
` If camera tampering is detected, after some time(five sec), stabilization will be done before restarting. During
VIDEO ANALYTICS
▶ 1. TAMPERING
OFF
2. MOTION
OFF
3. RETURN
TAMPERING
▶ 1.
SENSITIVITY MIDDLE
2.
ALARM OUT
3. RETURN