Samsung SCD-5020, Руководство пользователя, Страница: 13 / 39

●
inst
alla
tion
English_13
tapping screw
Ceiling bracket
tapping
screw
Pan Base
fixation
screw
M
`
The installation should be done by qualified service personnel or system installers.
`
If the ceiling material is not strong enough to hold the installation screws, the camera
may fall off. Reinforce the ceiling as needed.
`
To change the position of the cable, take away the Hole Cover and pass the cable
through.
2. Hold the ceiling bracket (located where the arrow points to) and separate it from the main body
of the camera by rotating it anti-clockwise.
3. Place the separated ceiling bracket so that the “Front” side faces the area to be monitored and
install it with the M4 tapping screws.
4.
To combine the main body with the ceiling bracket, make sure that the pan base fixation screw
face the opposite side of the “Front” side of the ceiling bracket and rotate it clockwise.
5. Adjust the camera lens to face the area to be monitored and fix the main body and the dome
cover by rotating the body clockwise.
BOTTOM
SET