●
setup
English_25
y
sYNC
: In areas where the supply is at 50Hz(PAL), you
can synchronize the output phase of multiple cameras
using the power synchronization function (Line-Lock)
without using a synchronization signal generator.
- INT: Internal Synchronization Type
- L/L : Power Synchronization Type, Line-lock
n
Press the Function Setup switch.
Y
You can select a desired phase from 0 to 359 when select ‘phase’.
`
When using AC power at 50Hz(PAL) frequency, you can use the L/L type synchronization.
`
When the power is DC 12V, the SYNC menu is fixed to the ‘INT’ mode.
y
ReVeRse
: You can reverse the picture.
- OFF : You don’t reverse the picture.
- H-REV : You can flip the picture horizontally on the screen.
y
sHARpNess
: As you increase this value, the picture outline becomes stronger and clearer.
Adjust this value appropriately depending on the sharpness of the picture.
y
COAX
：
COAX option is set to "On" will specify the use of coaxial communication.
y
SSDR(
samsung super Dynamic Range)
SSDR illuminates darker areas of an image while
retaining the same light level for brighter areas to even
out the overall brightness of images with high contrast
between bright and dark areas.
1.
When the SETUP menu screen is displayed, select ‘SSDR’ by using the Function Setup
switch so that the arrow indicates ‘SSDR’.
2. Use the Function Setup switch to change the SSDR level in the sub menu according to the
contrast between bright and dark areas.
M
SYNC
▶
PHASE
*
IIIIIIIIIIIIIIIIIIIII
0
Press SET to Return
SSDR SETUP
▶
LEVEL
IIIIIIIIII
*
IIIIIIIIIII
8
Press SET to Return
SCD-1020_1040_ENG.indd 25
2012-8-29 15:56:58