●
se
TU
p
English_21
INdOOR
: Select this when the color temperature is between 4,500°K and 8,500°K.
MaNUal
: Select this to fine-tune White Balance manually. Set White Balance first by using the ATW
or AWC mode. After that switch to MANUAL mode, fine-tune the White Balance and then press the
Function Setup switch.
aWC
→
Set
: To find the optimal luminance level for the current environment, point the camera
towards a sheet of white paper and press the Function Setup switch. If the environment changes,
readjust it.
`
White Balance may not work properly under the following conditions. In this case, select AWC
↑
SET
mode.
1
When the color temperature of the environment surrounding the subject is out of the control range
(e.g. clear sky or sunset).
2
When the ambient illumination of the subject is dim.
3
If the camera is directed towards a fluorescent light or is installed in a place where illumination
changes dramatically, the White Balance operation may become unstable.
baCkligHt
The SCD-1020/1040 is designed so that it delivers a distinctive subject and background at the same time, even
when the subject is in backlight, by adopting a function of the proprietary B2 DSP chip.
1. When the SETUP menu screen is displayed, select ‘BACKLIGHT’ by using the Function Setup switch so
that the arrow indicates BACKLIGHT.
2.
Select a desired mode using the Function Setup switch depending on the camera purpose.
USeR blC
: Enables a user to directly select a desired
area from a picture and to view the area more clearly.
- LEVEL : Adjusts the brightness level of a monitoring
area.
- TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be
enhanced.
M
BLC SETUP
▶
1. LEVEL
MIDDLE
2. TOP
IIIII
*
IIIIIIIIIIIIIIII
81
3. BOTTOM
IIIIIIIIIIII
*
IIIIIIIII
181
4. LEFT
IIIIII
*
IIIIIIIIIIIIIII
211
5. RIGHT
IIIIIIIIIIIIIIII
*
IIIII
461
6. RETURN
SCD-1020_1040_ENG.indd 21
2012-8-27 10:08:30