●
se
TU
p
English_19
1. Press the Function Setup switch.
Main setup menu is displayed on the monitor screen.
2.
Select a desired function using the Function Setup switch.
Place the cursor over a desired item.
3.
Set up a selected item by using the Function Setup switch.
4.
To finish the setting, select ‘EXIT’ and press the Function Setup switch.
`
An item with the
icon also has sub menus. To select a sub menu, select an item with the
icon and press the Function Setup switch.
`
An item with the
- - -
icon is unavailable due to function settings.
expOsURe
1.
When the SETUP menu screen is displayed, select EXPOSURE by using the Function Setup
switch so that the arrow indicates 'EXPOSURE'.
2.
Select a desired mode using the Function Setup switch.
BRIGHTNESS : Adjusts the video brightness.
AGC (AUTO GAIN CONTROL)
（
OFF/LOW/MID/HIGH
)
:
The higher the gain level, the brighter the screen- but the
higher the noise.
RETURN
：
Select this to save the changes in the EXPOSURE menu and return to the SETUP menu.
MAIN SETUP
▶
1.EXPOSURE
2.DEFOG OFF
3.WHITE BAL ATW
4.BACKLIGHT
OFF
5.SSNR ON
6.DAY/NIGHT
AUTO
7.SPECIAL
8.EXIT SAVE
Change the status
using the Function
Setup switch left/right.
Select the function
using the Function
Setup switch up/
down.
M
EXPOSURE SETUP
1.BRIGHTNESS
IIIIIIIII*IIIIIIII
10
2.AGC MIDDLE
3.RETURN
SCD-1020_1040_ENG.indd 19
2012-8-27 10:08:30