33
Operating Instructions
Operating Instructions
32
- When “PRESET 3200K” is set, each Red and Blue
comes out in 3200°K.
- When “PRESET 5600K” is set, each RED and Blue
comes out in 5600°K.
- When “PRESET OFF (USER)--” is set, each Read
and Blue Gain can be adjusted by the user.
(AWB/MANU)
OFF(USER)--
----
----
PRESET
RED (0)
BLUE (0)
RET
----
----
(AWB/MANU)
OFF(USER)--
----
----
PRESET
RED (0)
BLUE (0)
RET
----
----
7) SYNC MODE
Move the cursor to “SYNC” and select the
“Power Sync (LINE---)/Internal Sync (INT)”
using right/left direction switch.
If the camera is set to INT (Internal Sync) mode
when monitoring in the Auto Switching mode with
more than one camera connected to a sequential
switcher, etc, the jump of the screen will occur each
time of screen switching.
To switch the screen gently without a jump, set the
camera to “L.L” and adjust the Vertical Sync Phase.
* However, L.L function can be used only when
using AC power. This setting is prohibited when
DC power is used. When DC power is used, only
INT is available.
(SET UP)
OFF
OFF
ALC---
OFF
ON
ATW
INT
FIX
OFF
QUIT?
CAMERA ID
SENSE UP
ALC/ELC
BLC
AGC
WHITE BAL
SYNC
VIDEO CON
MOTION DET
EXIT
00107A SCC-833P/855P - gb 11/22/00 3:36 PM Page 32