SYSTEM CONTROLLER
User’s Manual
28
SYSTEM CONTROLLER
User’s Manual
27
8. AF
This menu is for adjusting camera focus manually or automatically after camera
operation. If AF is set to OFF in the camera setup menu, set the AF of the controller to
ON and then automatic adjustment is performed after camera operation.
At the [PTZ SETUP 1 ] menu, press the
button
(see p.19).
Press the 3 button to move to the AF Setup screen.
Press the 1 button to automatically adjust the focus
after camera operation. Press the 2 button to disable
automatic focus adjustment after camera operation.
• Auto Focus Setup is also available in the OSD menu
of the camera connected.
• It is recommended that you set up the AF function
through the camera OSD menu.
9. OSD
This is used for displaying the camera menu on the monitor.
Press the OSD button from the PTZ or DVR mode. (Warning: Execute only from the Master controller).
Use the controller buttons to set up the camera
menu. Press the OSD button to change to the OSD
controller screen. The OSD control mode only controls
PTZ OSD related functions. Press the OSD button
again to exit the OSD mode.
- OSD : SPD-3300/3000/2300/2500/2200/1600 - Toggle camera menu on/off (hold down for 2 seconds)
PELCO-D - Toggle camera menu on/off
PANASONIC (WV-CS854A) - Toggle camera menu on/off (press CLR)
Samsung (SCC-643/641) - Toggle camera menu on/off (press CLR)
- CLR
: Cancels the menu selection.
- SET
: Selects the menu.
-
: Moves the menu cursor right.
-
: Moves the menu cursor left.
-
: Moves the menu cursor up.
-
: Moves the menu cursor down.
- Joystick : Use the joystick to move the menu cursor up, down, left, and
right.(Applies to SPD, PELCO-D and Samsung models only:)
• Joystick or other button inputs cannot be used for camera operation when the camera menu
is displayed on the monitor.
• PRESET, SWING, GROUP, and TRACE functions can be set in the OSD menu of the camera.
• Please refer to the camera manual for more information on the camera menu.
• When operating the PTZ camera OSD menu while the controller and SVR-
1650/1640/950/1630 are connected, the ENTER and ESC functions can only be performed
by the FOCUS -/+ button.
PTZ SETUP 2
1:MODEL 2:TRACE
3:AF
Press Numeric Key
PTZ OSD CONTROL
OSD: OSD CONTROL EXIT
MASTER ID : 1
AF STOP SETUP
CAM ID:
5
SPD
1:AF ON
2:AF OFF
Press Numeric Key
PTZ Mode
PTZ Mode
