Samsung SCB-2004, Руководство пользователя, Страница: 26 / 32

ＴＯＰ／ＢＯＴＴＯＭ／ＬＥＦＴ／ＲＩＧＨＴ：
Adjust the area to be enhanced.
ＲＥＴＵＲＮ ：
ＳＥＮＳＩＴＩＶＩＴＹ：
Adjust the sensitivity of MD. the lower level, the higher sensitivity.
Select this to save the MOTION DET menu settings and return to the SPECIAL
menu.

MOTION DET areas show only MOTION DET menu. Therefore, MOTION DET areas don’t
display on the monitor screen.
Setup
2
Set up the mode using the Function Setup switch.
ＡＲＥＡ：
You can select up to 4 MD areas.
ＭＯＤＥ： Determines whether to use the MD area selected in AREA.

COaX
: COAX option is set to "On" will specify the use of coaxial communication.

SSDR(
samsung super dynamic Range)
1.
SSDR SETUP
▶
LEVEL
IIIIIIIIII
*
IIIIIIIIIII
8
Press SET to Return
SSDR illuminates darker areas of an image while
:
retaining the same light level for brighter areas to
even out the overall brightness of images with
high contrast between bright and dark areas.
When the SETUP menu screen is displayed, select ‘SSDR’ by using the
Function Setup switch so that the arrow indicates ‘SSDR’.
2. Use the Function Setup switch to change the SSDR level in the sub menu according to
the contrast between bright and dark areas.
26_ Setup


SYNC
▶
PHASE
*
IIIIIIIIIIIIIIIIIIIII
0
Press SET to Return

syNC
: In areas where the supply is at
- INT: Internal Synchronization Type
- L/L : Power Synchronization Type, Line-lock

Press the Function Setup switch.

You can select a desired phase from 0 to 359 when select ‘phase’.
When using AC power at 50Hz(PAL) frequency, you can use the L/L type synchronization.
When the power is DC 12V, the SYNC menu is fixed to the ‘INT’ mode.
60Hz(NTSC), 50Hz(PAL), you can
synchronize the output phase of multiple
cameras using the power synchronization
function (Line-Lock) without using a
synchronization signal generator.