- 122 -
Voice Assistant Issues
When the Voice Assistant isn’t working, these steps may help resolve the problem.
"
This function may not be supported depending on the model or geographical area.
"
The
Voice Wake-up
function may not be supported depending on the model,
Voice Assistant
or geographical area.
The problem
Try this!
The voice commands do not work well.
Voice commands may differ depending on the
Voice Assistant
.
Refer to the command examples for each
Voice Assistant
.
●
Bixby
:
Explore Now
●
Google Assistant
:
Settings
General
Voice
Assistant Settings
Bixby answers automatically.
The product may recognise an ambient noise or everyday conversation as a call
to Voice Assistant.
Turn off the
Voice Wake-up
function or set the
Wake-Up Sensitivity
to
Low
.
●
Explore Now
Settings
Voice Wake-up
I spoke “Hi, Bixby” but Bixby does not
answer.
When the product is far from you or the ambient noise is so loud, the product
may be unable to recognise your voice.
●
For best results, you need to be within 10 feet (3-4 m) of your
product. Please look at your product screen and speak.
Turn on the
Voice Wake-up
function.
●
Explore Now
Settings
Voice Wake-up
Voice recognition does not work with
the Samsung Smart Remote unlike other
features.
There is no response even if the voice
entry button is pressed.
The connection between the remote control and the product may be lost. Try
pairing the remote control with the product.
Point the Samsung Smart Remote at the front of the product, and then press
and hold the
and
buttons simultaneously for 3 seconds or more.
Also, if the remote control does not work properly or its response is very slow,
the battery might be low or dead.
●
Charge the remote control by using the solar cell or the USB
port(C-type) on the bottom.
●
If the remote control has batteries, replace them with new ones.
During voice recognition, the heavy load
message appears and the function does
not work.
Unplug and then plug the product power cable and then try again after 1 minute
and 30 seconds. It may take a while if the voice recognition server is being
inspected.
I want to see weather information of the
desired area.
Say with the area name included.
