Samsung S27AG32 Series, Руководство пользователя

Страница: 24 / 37

Off Timer Plus Off Timer • Off Timer : Turn on Off Timer mode.
• Turn Off After : The off timer can be set within a range of 1 to 23 hours. The product will automatically power off after the specified number of
hours.
― This option is only available when
Off Timer is set to On .
― For products for the market in some regions, the
Off Timer is set to automatically activate 4 hours after the product powers on. This is done in accordance
with power supply regulations. If you do not want the timer to activate, go to → System → Off Timer Plus and set Off Timer to Off .
Eco Timer • Eco Timer : Turn on Eco Timer mode.
• Eco Off After : The Eco Off After can be set between 10 and 180 minutes. The product will automatically power off after the specified time has
elapsed.
― This option is only available when
Eco Timer is set to On .
PC/AV Mode Set PC/AV Mode to AV . The picture size will be enlarged.
This option is useful when you view a movie.
― Products with a display area of 16:9 or 16:10 are only supported.
― If the product is in
HDMI , DisplayPort mode and the screen says Check the cable connection and the settings of the source device. press the JOG button to
display the Function Key Guide screen and then select → System → PC/AV Mode → HDMI , DisplayPort → PC or AV .
― If input source is AV device, the screen may not display properly or there is no sound. Set
PC/AV Mode to AV .
Source Detection Select either Auto or Manual as the method to recognize input signal.
Key Repeat Time Control the response rate of a button when the button is pressed.
Acceleration , 1 sec , or 2 sec can be selected. If No Repeat is selected, a command responds only once when a button is pressed.
Power LED On Configure the settings to enable or disable the power LED located at the lower part of the product.
• Working : The power LED is on when the product is turned on.
• Stand-by : The power LED is on when the product is turned off.
24
Self Diagnosis Perform this test when you experience a problem with your monitor's picture.
― Never turn off the power nor change the input source during self diagnosis. If possible, try not to interrupt testing.
2nd 3rd Description