background image

36

Configuring the PIP/PBP Settings

A detailed description of each function is provided. Refer to your product for details.

Chapter  05

 

The functions available may vary depending on the product model. The color and shape of parts may differ 
from what is shown. Specifications are subject to change without notice to improve quality.

PIP/PBP Mode

Enable or disable the 

PIP/PBP Mode

 function.

The PIP (Picture in Picture) function separates the screen into two parts. One source device is displayed 
on the main screen at the same time the another source device is displayed in inset windows.
The PBP (Picture by Picture) function separates the screen in half displaying output from two different 
source devices simultaneously on the left and right sides of the screen.

 

PIP/PBP

 mode is compatible with Windows 7, Windows 8, and Windows 10.

 

The 

PIP/PBP

 function may not be available depending on the specifications of the graphics card used. If the 

screen is blank in 

PIP/PBP

 mode when the optimum resolution is selected, go to 

Control Panel

 → 

Display

 → 

Screen Resolution

 and click 

Detect

 on the PC. (Instructions are based on Windows 7.) If the screen is blank 

when the resolution is set to the optimum resolution, change the resolution to 1280 x 1024.

 

The screen may flicker briefly or appear after a delay when you enable or disable the 

PIP/PBP

 function or 

when you change the screen size with the 

PIP/PBP

 function activated.

This can typically arise when a PC and a monitor are connected to two or more input sources. It has nothing 
to do with the performance of a monitor.
The issue is mainly caused when the video signals are delayed in transmission to the monitor depending on 
the graphics card performance.

 

When the 

PIP/PBP

 function is enabled, the resolution will not be able to automatically switch to the 

optimum resolution due to a compatibility issue between the graphics card and the Windows system.
Set 

PIP/PBP Mode

 to 

Off

. Alternatively, restart the monitor, then set the resolution to the optimum setting 

using the Windows interface.

Содержание S24H851QF Series

























































Отзывы: