Samsung S24A400VEU Скачать руководство пользователя страница 1

User Manual

(a) An engineer is called out at your request, but it is found that the product has no defect (i.e., 

where the user manual has not been read).
(b) You bring the unit to a repair centre, but it is found that the product has no defect (i.e., where the 

user manual has not been read).

You will be informed of the administration fee amount before a technician visits.

S24A40*

 

The colour and the appearance may differ depending on the product, and the specifications are 
subject to change without prior notice to improve the performance.

The contents of this manual are subject to change without notice to improve quality.
© Samsung
Samsung owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung is 
prohibited.
Trademarks other than that of Samsung are owned by their respective owners.

An administration fee may be charged in the following situations:

Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per 

Samsung S24A400VEU

o cerca il tuo prodotto tra le 

migliori offerte di Monitor

Содержание S24A400VEU
















































Отзывы: