manualshive.com logo in svg

Samsung RF263BEAE SERIES, Руководство по обслуживанию, Страница: 52 / 105

Поделиться
Скачать
Samsung RF263BEAE SERIES Скачать руководство пользователя страница 52

51

troublesHooting

4-1-1. Test mode (manual operation / manual defrost function)

•  If Energy Saver Key + Fridge Key on the front of panel are pressed simultaneously for 8 seconds , it will be 

changed to the test mode and all displays on the front of panel will be off.

•  If any key on the front of panel is pressed within 15 seconds after the test mode, it will be operated as below 

sequence : 

Manual operation1(FF) Manual operation2(0F-r) -> manual defrost of fresh food compartments(rd) -> manual 

defrost of fresh and freezer compartments(fd) -> cancel(Display all off).

•  If any key on the front of panel is not pressed within 15 seconds after the test mode, the test mode will be 

canceled and it will be returned to previous mode.

①

 Energy Saver Key + Fridge Key are pressed simultaneously for

8 seconds, (displays are all off)

It will be changed to the test mode (manual operation) by pressing any key

1-1)  If any key is pressed once in test mode, blinks "FF" on the display and it indicates the refrigerator has 

entered the manual operation. At this moment, buzzer beeps as an alarm.

1-2)  If any key is pressed once at the manual operation1 status, OF-r will be displayed. 

FF and OF-r means manual operation 1 and 2 separately. These 2 functions operate with same RPM of 
COMP.

1-3)  If manual operation is selected, compressor will run at once without 7 minutes delay in any mode. 

If the refrigerator is on the defrost cycle at the moment, defrost will be finished and manual operation will 
begin. 
(Be careful if manual operation get started at the moment of compressor off, over load could be occurred)

1-4)  If manual operation works, compressor & f-fan operate continuously for 24 hours and fresh food 

compartment will be controlled by the setting temperature.

1-5)  When the manual operation runs, setting temperature will be selected automatically as below: freezer 

compartment -8°F(-22°C), fresh food compartment 34°F(1°C).

1-6)  During manual operation, Freezer Key & Power Cool function will not be work. 

If a function is selected, the power function icon of the selected function will be off automatically after 10 
seconds.

1-7)  Manual operation can be canceled by removing power from the unit, then resupplying power.
1-8)  Alarm(0.25 sec ON/ 0.75 sec OFF) will beep continuously until manual operation is completed and there is 

no function to make the sound stop.

Compulsion working 1 : 3600RPM

Compulsion working : 3600RPM

1) Manual operation function

①

①

4-1) Function for failure diagnosis

Содержание RF263BEAE SERIES










































































































Отзывы:

Нет отзывов