Samsung RF18A Series, Руководство по обслуживанию

Страница: 5 / 111

5
This document cannot be used without Samsung's authorization.
1. PRODUCT INFORMATION
• Unplug the appliance before carrying out any repair.
• Use rated electronic Control equipment.
→ Make sure to check out Model name, Rated voltage, Rated current, Operation Temp, etc.
• Upon repair, make sure that all harnesses are watertight and are secured.
• Upon repair, completely remove any dust or other foreign substances from housing, harness,
connector, etc.
→ Cleaning will prevent possible risk of fire or malfunction.
• Check if water or moisture as penetrated into the electronic Control system.
→ If there is any water or moisture present, take necessary measures such as replacing components,
insulation, seals, etc.
• After repair, . Ensure the product is fully reassembled.
→ It should be returned to the previous state, with all parts and covers correctly secured in position.
• Check out the surrounding conditions.
→ Advise customer to change the location, if the fridge is located in humid, wet place or the installed
location is unstable.
• In to prevent electric shock the appliance must be properly earthed / grounded.
• Advise users not to overload socket outlet.
• Ensure it is not broken, squashed, cut and there is no evidence of heat damage, Repair or replace the
defective power cord immediately.
• Users must not attempt to repair the product by themsel.
• Do not store other materials except the foods.
→ Pharmaceutical, Chemical substances: as these require controlled storage environment.
→ Flammable material (alcohol, benzene, ether, LPG, etc) : as there is a risk of explosion.