background image

29

Temp Control &Operation Functions

1-1) Year 2005 W2 Model is one with Auto Ice Maker and Ice Water Valve.
1-2) When the Ice Off button is pressed,the Auto Ice Maker does not operate.
1-3) Ice stored in the ice bin is available with the Ice Off button selected.
1-4) The Auto Ice Maker function is introduced in the Ice Maker function.

1) Ice Off Function

11-4) Ice Off Function

1-1) When the Child Lock is selected,the Child Lock LED will light up.Press the button one more time to cancel

its function. When t he Chi l d Lock i s sel ect ed,al l of t he f unct i on but t ons do not operate.So,
temperature control ,Super and Ice Off functions wi l l keep their current settings.It is devised to prevent
children from changing the settings.

1-2) When the Child Lock button is pressed,the Child Lock LED will light up and when its function is

cancelled,the Child Lock LED will go off and other buttons will work.

- Select the function if necessary. But, keep it in mind that this function can bring up consumer calls. So, have a

better understanding of it.

1) Child Lock Function

11-5) Child Lock Function

It operates with the
Child Lock button
pressed for 3 seconds.

Содержание RB195BSBB

















































































Отзывы: