Samsung R418, Руководство пользователя

Страница: 38 / 84

General
European standards dictate maximum
radiated transmit power of 100 mW effective
isotropic radiated power (EIRP) and the
frequency range 2400 – 2483.5 MHz.
The low band 5.15 - 5.35 GHz is for indoor
use only.
Belgium
The product may be used outdoors, but for
outdoor transmissions over a distance of
300m or more, a license from the BIPT is
required.
This restriction should be indicated in the
manual as follows:
Dans le cas d’une utilisation privée, à l’
extérieur d’un bâtiment, au-dessus d’un
espace public, aucun enregistrement n’
est nécessaire pour une distance de moins
de 300m. Pour une distance supérieure à
300m un enregistrement auprès de l’IBPT
est requise. Pour une utilisation publique à l’
extérieur de bâtiments, une licence de l’IBPT
est requise. Pour les enregistrements et
licences, veuillez contacter l’IBPT.
France
For Metropolitan departments:
2.400 - 2.4835 GHz for indoor use.
2.400 - 2.454 GHz (channels 1 to 7) for
outdoor use.
For Guadeloupe, Martinique, St Pierre et
Miquelon, Mayotte:
2.400 - 2.4835 GHz for indoor and outdoor
use.
For Reunion, Guyane:
2.400 - 2.4835 GHz for indoor use.
2.420 - 2.4835 GHz for outdoor use (channels
5 to 13)
The low band 5.15 - 5.35 GHz is for indoor
use only.
European Telecommunication
Information (for products fitted with
EU-approved modems)
Marking by the symbol indicates
compliance of this equipment to the Radio
and Telecom Terminal Equipment Directive
1999/5/EC. Such marking is indicative
that this equipment meets or exceeds the
following technical standards:
CTR 21 - Attachment requirements for
pan-European approval for connection to
the analogue Public Switched Telephone
Networks (PSTNs) of TE (excluding TE
supporting voice telephony services) in
which network addressing, if provided, is by
means of Dual Tone Multi-Frequency (DTMF)
signaling.
Although this equipment can use
either loop disconnect (pulse)
or DTMF (tone) signaling, only
the performance of the DTMF
signaling is subject to regulatory
requirements for correct operation.
It is therefore strongly
recommended that the equipment
is set to use DTMF signaling
for access to public or private
emergency services. DTMF
signaling also provides faster call
setup.
This equipment has been approved to
Council Decision 98/482/EEC - “CTR 21” for
Pan-European single terminal connection
to the Public Switched Telephone Network
(PSTN).
However, due to differences between the
individual PSTNs provided in different
countries, the approval does not, of
itself, give an unconditional assurance
of successful operation on every PSTN
termination point. In the event of problems,
you should contact manufacturer Technical
Support.