Samsung PLK435W, Инструкция по эксплуатации, Страница: 19 / 64

17
Cable with a Cable Box that Descrambles Some (But Not All) Channels
To complete this connection you will need a two-way splitter, an RF (A/B) switch and four coaxial cables
(which you buy from your Samsung dealer or any electronics store).
1
Find and disconnect the cable that
is connected to the ANTENNA IN
terminal on your cable box. This ter-
minal might be labeled “ANT IN,”
“VHF IN,” or simply, “IN.” Connect
this cable to a two-way splitter.
2
Connect a coaxial cable between
an OUTPUT terminal on the splitter
and the IN terminal on the cable
box.
3
Connect a coaxial cable between
the ANTENNA OUT terminal on the
cable box and the B–IN terminal on
the A/B switch.
4
Connect another cable between the
other OUT terminal on the splitter
and the A–IN terminal on the RF
(A/B) switch.
5
Connect the last coaxial cable
between the OUT terminal on the
RF (A/B) switch and the VHF/UHF
terminal on the rear of the TV.
After you’ve made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B
switch to the “B” position to view scrambled channels. (When you set the A/B switch to “B,” you will need
to tune your TV to the cable box’s output channel, which is usually channel 3 or 4.)
LK435W(eng)US 11/29/00 10:41 M Page 17