80
Use WPS
"
This function may not be supported depending on the model.
How to set up using Use WPS
If your router has a
Use WPS
button, follow these steps.
1
Set
Network Type
to
Wireless
from the
Open Network Settings
page.
2
Select
Use WPS
, press
E
.
3
Press the WPS or PBC button on your wireless router withine the next two minutes. Your
product automatically acquires all the network setting values it needs and connects to your
network.
– If you want to use the WPS PIN, select
WPS PIN
.
Go to your wireless router's Settings, enter your PIN, and then select
OK
.
4
The network connection screen appears, and network setup is done.
IPv6
MENU
m
→
Network
→
IPv6
→
ENTER
E
Enable or disable IPv6.
•
Off
( ) /
On
( )
"
This function may not be supported depending on the model.
IPv6 Status
MENU
m
→
Network
→
IPv6 Status
→
ENTER
E
Check the status of your IPv6 Internet connection.
"
This function may not be supported depending on the model.
