61
VIEWING MESSAGE INDICATIONS
You can view all of your message indications before you return them:
•
With the handset on-hook, press the
MESSAGE
button with the flashing indi-
cator.
•
The first station that left a message indication will be displayed.
•
Press the
UP
and
DOWN
arrows to scroll through the stations that left mes-
sage indications. Use the soft keys to reply, clear or advance to the next mes-
sage.
•
Press the
END
button to return your keyset to the idle condition.
PERSONAL SPEED DIAL NAMES
Each personal speed dial number can have an 11 character name assigned to it.
This name is used to select the speed dial bin when you are dialing by directory.
•
Press
TRANSFER
and then dial
106
.
•
Dial the speed dial bin number
00–49
.
•
Write your message using the procedure described in
•
Press the
TRANSFER
key to store the speed dial name.
•
Repeat for each speed dial bin if necessary.
See Programming Personal Speed Dial Numbers Section.
STATION NAMES
See Application Program Menus—My Phone.
MANAGING KEY ASSIGNMENTS
You can view your key assignments and add extenders to some of your program-
mable keys for easy one touch operation of frequently used features.
•
While on-hook, press
TRANSFER
and then dial
107
.
•
Use the
VOLUME
buttons to scroll through all of your programmable buttons
OR
press the programmable button to which you want to add the extender.
•
When you reach a key listed below, dial the corresponding extender.
•
Press
TRANSFER
to store and exit programming.
Please refer to the
Enhanced Display Programming Section
provided by your instal-
lation company when requested for a complete list of descriptions and extenders
for any keys you may have programmed on your keyset.
NOTE: Confirm that the cursor is placed correctly before you enter the extender.
60
DISPLAY NUMBER DIALED
Display keysets begin showing digits as they are dialed. They will stay in the dis-
play until the call duration timer comes on automatically or the
TIMER
button is
pressed. If the call duration timer is not used, the number dialed will be displayed
until the call is released, transferred or put on hold.
CALL DURATION TIMER
The system can be set to automatically time outside calls. A few seconds after you
dial a telephone number, the timer appears in the display. It appears immediately
for incoming calls. The call timer continues for the duration of the call. Call dura-
tion times are displayed in minutes and seconds. If a call lasts longer than 60 min-
utes, the timer restarts.
You can press the
TIMER
button to manually begin timing a call. Press it again to
stop timing. If you press it while the automatic timer is on, the call duration time
is restarted.
AUTO TIMER
Display keyset users may have the timer automatically start when they answer
incoming calls or after a short delay on an outgoing call.
•
With the handset on-hook, press
TRANSFER
and then dial
110
.
•
Dial
011
to turn the auto timer on or
010
to turn it off.
•
Press
TRANSFER
to store your selection.
From the LCD:
•
Press
MENU
button.
•
Scroll to
SETUP
option, press
ENTER
.
•
Scroll to
STATION ON/OFF
and press
ENTER
—
OR
—you may dial
6
and
immediately enter the option.
•
Scroll to
AUTO TIMER
, press
ENTER
.
•
Press
ENTER
to change option status.
•
Press
CANCEL
to enter change and return to Main Configuration Menu—
OR
—press
END
to return to idle screen.
TIMER FUNCTION
Display keyset users may use this feature as a simple stopwatch.
•
When the keyset is idle, press the
TIMER
button to start timing.
•
Press the
TIMER
button again to stop timing.
•
Read the elapsed time in the display.
•
Lift the handset and replace it. The display will return to date and time.
Home Page
ITP-5112L
Table of Contents
Содержание OfficeServ 7200
Страница 218: ...DS 5000 Home Page Table of Contents...
Страница 264: ...Home Page iDCS Keyset Table of Contents...
Страница 279: ...N O T E S Home Page Standard Guide Table of Contents...
Страница 302: ...Home Page System Admin Table of Contents...
