Samsung OfficeServ 7200, Инструкция пользователя

Страница: 188 / 368

For the purposes of pro-
gramming speed dial num-
bers, the programmable but-
tons are known as
A , B , C , D , E
and F .
• The A button is not used.
• The B button inserts a
flash.
• The C button inserts a
pause.
• The D button is used for
pulse to tone conversion. If your system uses rotary (or pulse) dialing C.O. lines,
pressing
D while entering a speed dial number causes all subsequent digits to
be sent as DTMF tones.
• The E button is used to hide digits. Display keyset users may want to hide
some speed dial numbers so that they will not show in the display. When you
are entering a telephone number, press
E . All subsequent digits will be hid-
den. Press E again to begin displaying digits.
• The F button is used to enter a name. See Personal Speed Dial Names under
Display Features.
• Use the HOLD button to clear a speed dial number.
ONE TOUCH SPEED DIALING
You may assign any speed dial number to an already existing One Touch Speed
Dial button for quick and easy dialing of frequently used numbers.
• While on-hook, press TRANSFER and then dial 107 .
• Press a One Touch Speed Dial button.
• Dial the speed dial number ( 00 – 49 or 500 – 999 ) that you want assigned to
this button.
• Press TRANSFER to store your selection.
To call this telephone number, just press the One Touch Speed Dial button.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the handset
or press the
SPEAKER button before you begin dialing.
LAST NUMBER REDIAL
To redial the last telephone number you dialed, press the REDIAL button or dial 19 .
NOTES:
1.
If the Hot Keypad feature has been turned off, you must first lift the handset
or press the
SPEAKER button before you begin dialing.
2. Redial does not apply to intercom calls.
25
A B C D E F
24
DIALING FEATURES
All “DIALING FEATURES” instructions are written to support Overlap Dialing mode.
This is the technical name for dialing from a telephone as it has been for many
years. In recent years the cell phone industry has changed the cell phones to use
Enblock Dialing. With this dialing mode all the digits are dialed and then sent to
the carrier after pressing the SEND key. Please check your telephone setup to con-
firm what dialing mode is used.
SPEED DIALING
You can dial a preprogrammed telephone number stored in the system-wide
speed dial list of numbers 500~999 or from your personal list of numbers 00~49.
Your system may be set for 950 system wide numbers. If so the system speed dial
access codes are 050~999 and the station speed dial codes are 000~049.
• With the handset on-hook, press the MEMORY button or dial 16 .
• Dial the desired speed dial number.
• The telephone number is automatically dialed for you.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the handset
or press the
SPEAKER button before you begin dialing.
PROGRAMMING PERSONAL SPEED
DIAL NUMBERS
You can program frequently dialed telephone numbers in a personal speed dial
list. A station may be assigned up to fifty numbers,
00–49 . See your system admin-
istrator to determine the amount assigned to your station.
• While on-hook, press TRANSFER and then dial 105 .
• Dial a speed dial number ( 00–49 ).
• Dial a line or line group access code.
• Dial the telephone number to be stored (24 digits maximum). It can include #,
, FLASH and PAUSE.
• Press TRANSFER to store the number.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the handset
or press the
SPEAKER button before you begin dialing.
DS 5000 Home Page Table of Contents