Samsung OfficeServ 7200 страница 30 Скачать руководство пользователя

Страница: 30 / 137

CHAPTER 2.

Error! Use the Home tab to apply

제목

장

제목

1 to the text that you want to appear here.

2-8

2.3.1 Control Boards

This section describes the configuration and functions of the MP20 and MP20S, which are

the main control boards that control all the functions of the OfficeServ 7200, and those of

the LCP, which is the minor control board.

2.3.1.1 MP20

The MP20 is the main control board that controls all the functions of the OfficeServ 7200

and is mounted on slot 0 of the basic cabinet. The MP20 performs voice switching,

processes signals, and manages the subscriber terminals.

Major Functions

The MP20 performs the functions below:



Operates applications through the LAN interface.



Easy Installation using the SD card.



Back ups the databases.



Provides ports for the Universal Asynchronous Receiver and Transmitter (UART) test.



Holds a meeting, detects caller IDs and multi-frequency and controls door phones.



Functions as the internal/external MOH or loud/common bell.



Sets the time and shows table time.



Functions as the Analog Phase Locked Loop (APLL) for the synchronization of the

digital subscribers.

Option Board

There are RCM2, MIS, CRM, IRM and Modem as option boards mounted in the MP20.

The functions of these option boards are as follows:



R2 CID Module 2 (RCM2): RCM2 detects an office line CID or transmits the CID

information to the extension telephone as the ASIC chips, which detect the CID. In

addition, RCM2 creates the R2 signal, the signaling signal between offices through the

composed option board. The location that the RCM2 is mounted in the MP20 is

provided and displayed on the MP20. If the RCM2 board is mounted, it is available to

create the R2 signal through the 30 channels, and detect the R2 signal of 8 channels or

office/extension CID of 14 channels. Selecting a detected signal (R2/CID) is decided

by the switch location of the RCM2. The Simultaneous R2 CID Support function

supports the 4 R2 channels and 6 office/extension CID channels at the same time (Over

V2.45)



Miscellaneous (MIS): MIS is the option board mounted in the MP20. The location is

provided and displayed on the MP20. MIS provides 2 external holding voice source

ports, an external paging port, a loud bell port, a common bell port, and also provides 2

dry contact ports that connect or disconnects the signal transmission or power supply

with external equipments.

Содержание OfficeServ 7200










































































































































Результаты поиска

Содержание OfficeServ 7200

Отзывы:

Похожие инструкции для OfficeServ 7200

Бренды по названию

Популярные бренды

Samsung OfficeServ 7200, Описание системы

Результаты поиска

Содержание OfficeServ 7200

Отзывы:

Похожие инструкции для OfficeServ 7200

Бренды по названию

Популярные бренды