OfficeServ 7100
PROGRAMMING
TECHNICAL MANUAL
PART 2 APRIL 2007
MMC: 846
WIP INFO
DESCRIPTION:
[MMC846] is used to display the handset information and set some parameters.
You can change USER ID, PASSWORD, and INSERT DGT.
No.
Parameter
Description
0
REGISTERED
Indicates whether the corresponding handset is registered
1
LOCATED
Indicates whether the corresponding handset is currently connected to
the system
2
PHONE TYPE Indicates the type of the handset
5
IP OFFSET
Location of the IP pool where the IP assigned to handset is located
6
IP ADDRESS
IP address assigned to the registered handset
7
MAC ADDR
MAC address of the registered handset
8
USER ID
Sets ID by the handset user
9
PASSWORD
Sets password by the handset user
10
INSERT DGT
If the number of digits you pressed when originating a call in handset is
more than 5, the set INSERT DGT is inserted before the number you
pressed.
However, the number you pressed should not be C.O. Line number, C.O.
Line group number, LCR, network LCR, or number starting with the
function code
ACTION
DISPLAY
1.
Select the MMC number [846].
[3301] REGISTERED
NO
2.
Select a desired handset number.
Or select a desired handset number
[3301] REGISTERED
NO
using the [
▼
Volume
▲
] button, and press
[RIGHT] soft button to move the cursor.
3.
Enter a desired item number.
Or select a desired item using the
[3301] LOCATED
DETACH
[
▼
Volume
▲
] button, and press [RIGHT]
soft button to move the cursor.
Home Page
Table of Contents