OfficeServ 7100
PROGRAMMING
TECHNICAL MANUAL
PART 2 APRIL 2007
MMC: 404
TRUNK NAME
DESCRIPTION:
Allows an 11-character name to be entered to identify an individual trunk.
Names are written using the keypad. Each press of a key selects a character. Press
the desired key to move the cursor to the next position. For example, if the directory
name is SAM SMITH, press the number 7 three times to get the letter S. Now press
the number 2 once to get the letter A. Continue selecting characters from the table
below to complete your message. Pressing the A key changes the letter from upper
case to lower case.
NOTE: When the character you want appears on the same dial pad key as the
previous character, press the UP key to move the cursor to the right or the DOWN key
to move the cursor left. A space can be entered by using these keys.
•
iDCS, DS and ITP KEYSETS
COUNT
1 2 3 4 5
DIAL 0
<
>
.
)
0
DIAL 1
space
?
,
!
1
DIAL 2
A
B
C
@
2
DIAL 3
D
E
F
#
3
DIAL 4
G
H
I
$
4
DIAL 5
J
K
L
%
5
DIAL
6
M N O ^ 6
DIAL 7
P
Q
R
S
7
DIAL 8
T
U
V
4
8
DIAL 9
W
X
Y
Z
9
DIAL
4
: = [ ]
4
1. When the character you want appears on the same dial pad key as the previous
character, press UP to move the cursor one space to the right.
2. Other symbols are available for DIAL #.
Home Page
Table of Contents